•
======
“Play Tara Way”

Chains & Latex FetishCouture
by !dM deviousMind
======
•

Tie it together or tear it away… whichever your route, you can’t go wrong with our little latex number of “Play Tara Way” ;) And since there’s never enough colors (and even less when it comes to latex usually!!) the costume is available in a total of 14 colors: **ONYX**, **SILVER**, **PEARL**, **CANARY**, **TANGERINE**, **RED**, **COTTON CANDY**, **SHOCKING PINK**, **PURPLE**, **BLUE**, **TURQUOISE**, **MINT**, **ELECTRIC LIME**, **KHAKI** and of course if you can’t decide which one to go for (or the ultimate mix-and-match fun!!) as well an **ALL COLOR PACK** including every existing shade and two multipacks, **FETISH PACK** for containing all the classics, and **TECHNO CANDY PACK** if you’d like to let your inner fashionista, cyberpunk and raver girl come out to play this summer.

The rigged mesh latex halter dress comes in 5 sizes (XS, S, M, L and XL) based on the standard sizing system and is made of glossy latex held together by (texture based) metal chains. The minidress is worn above a full fishnet bodysuit or just plain skin – no panties, naturally! ;) The bodysuit comes on all texture layers plus tattoo layer with matching appliers for Lolas Tango (these will work on Lush as well, I learned!)

For a complete styling, the outfit includes 4 sizes of latex arm wraps as well as zipped overknee latex boots, both added as unicolor and with accented straps in metal color. To round it off, Tara wraps an open metal chain around your neck, running along the low cut cleavage on front and dangeling down the back; the chain accessory is made of unrigged mesh and you can choose between light, medium and dark metal.

We’re sure you’ll have fun with this one – Tara’s eclectic mix of gloss, chain & fishnet adds a very unique style mix to your inventory and will allow you to set the flavor simply by the choice of color from classic fetish all the way to excitingly bold fashion statement!

Please take note, this costume requires a mesh compatible viewer as the style cannot be created with regular texture layers. Hair/Skin is not included.

Also included is an UPDATE CHECK to keep you up to date with every piece of this outfit – this is an important part so make sure you know where it is :) Please find further details after the content listing.

CONTENT:
———

You should find the following things in your new couture box – Permissions are (copy/no mod/no transfer) unless otherwise stated.

** in the following represents the color you purchased.

Clothing layers:
—————–

Alpha layers (copy/mod/no transfer):
• !dM Tara – halterDress alpha (optional)
• !dM Tara – overkneeBoots alpha/A
• !dM Tara – overkneeBoots alpha/B
• !dM Tara – armWraps alpha

Shoe base (copy/mod/no transfer):
• !dM Tara – overkneeBoots base

Tatoo layer:
• !dM Tara – fishNet bodysuit/AB **BLACK**

Underpants and Pants Layers:
• !dM Tara – fishNet bodysuit/B **BLACK**

Undershirt, Shirt and Jacket Layers:
• Tara – fishNet bodysuit/A **BLACK**

Lolas Tango Appliers
(no copy/mo mod/no trans):
—————-

• !dM Tara ::Lolas Tango BRA applier:: bodysuit **BLACK**
• !dM Tara ::Lolas Tango TOP applier:: bodysuit **BLACK**

Rigged Mesh HalterDress:
———————

• !dM Tara – chained LatexDress/XL ** (pelvis)
• !dM Tara – chained LatexDress/L ** (pelvis)
• !dM Tara – chained LatexDress/M ** (pelvis)
• !dM Tara – chained LatexDress/S** (pelvis)
• !dM Tara – chained LatexDress/XS ** (pelvis)

There is an optional alpha layer included; depending on your shape, you
may find a size that does not require any alpha though :D

Rigged Mesh Boots and Armwraps:
———————

The following come in sizes XS, S, M and L -
XYZ stands for purchased color, CONTRAST for contrast color
SILVER on light and ONYX on dark shades:

• !dM Tara – zipped latexBoots/x ** (left)
• !dM Tara – zipped latexBoots/x ** (right)
• !dM Tara – zipped latexBoots/x **XYZ/CONTRAST** (right)
• !dM Tara – zipped latexBoots/x **XYZ/CONTRAST** (right)

• !dM Tara – latex armWraps/x ** (left)
• !dM Tara – latex armWraps/x ** (right)
• !dM Tara – latex armWraps/x **XYZ/CONTRAST** (right)
• !dM Tara – latex armWraps/x **XYZ/CONTRAST** (right)

Mesh attachments with resize & stretch option:
—————————————-

• !dM Tara – metalChain **LIGHT** (chest)
• !dM Tara – metalChain **MEDIUM** (chest)
• !dM Tara – metalChain **DARK** (chest)

• !dM Tara – Lolas metalChain **LIGHT** (chest)
• !dM Tara – Lolas metalChain **MEDIUM** (chest)
• !dM Tara – Lolas metalChain **DARK** (chest)

Checking for Updates:
————————

• !dM deviousMind “Tara” ** – CHECK FOR UPDATE (rezz)

Please inform us if anything is missing, just make sure SL did unpack it all! Sometimes not all items are copied to your inventory, so please double-check by unpacking the box again in a low-lag zone before getting in touch with us.

Enjoy your new costume!

==========================
DETAILED INFORMATION
==========================

Use of “add”:
—————

To wear all alpha layers at the same time, right-click in inventory and choose “add” instead of “wear”. Same applies if you want to add additional attachments to spots already occupied. :)

MESHES & TEXTURES:
——————–

Rigged mesh cannot be adjusted in size or position on an avatar. For that reason, we’ve joined the idea of “Standard Sizing” and added sizes L, M, S and XS for the mesh corset. Please try the demos to make sure one of them fits you.

Testing the sizes with different avatar shapes, we found that most effective fit (if required) can be achieved with adjusting the sliders for separate/join cleavage and gravity/less gravity for the upper part of the halter dress as well as butt size for the lower. For armwraps and boots play with the muscle slider, also knee angle influences the fit of mesh boots. If you’re unsure if you can get the outfit to fit, test it with the available demos before purchase :)

If you can’t see the mesh, please update your viewer.

All meshes used for this release are purchased content creator items with own, digitally illustrated textures. So you may find the mesh itself being used by other creators as well and have a shape adjusted to its fit already. :)

All textures this set are original designs and hand illustrated by Chandra Meehan for (*chanimations and deviousMind – if you find these textures elsewhere used by others, be sure their use isn’t legal and please inform me urgently!

Thank you very much in advance!

ALPHA LAYERS:
———

There is alpha layers included to make it all fit – if you can’t get it to work with those, we’ve included the textures full perm so you can download them to your computer and modify in a graphics program.

It shouldn’t need mention: the textures are for your personal use only and not to be used in any other form. Please respect my work and don’t pass these on full perm.

LOLAS TANGO APPLIERS:
—————-

Included in this set are appliers for Lolas Tango mesh breasts, created by Sandi Moonites. Please see creator profile for information where to acquire them and take note, the appliers will work with “Lolas Tango Appliers” compatible mesh breasts only (such as Lush).

Of course none of these mesh breasts are included in the outfit and sold by their respective creators.

Appliers and Lolas do sometimes “get stuck” with lag – if you’re hitting the applier HUD with no changes of your Lolas’ texture, please first check that the correct layer and corresponding HUD is being used (dress top or dress bra) and the sim you are in allows scripts. If it still won’t work, re-attach both Lolas and HUD and try again. Any further troubleshooting is out of my hand and needs to be taken to the creators of your mesh breasts.

RESIZE & STRETCH:
———————

We use a resize script that operates from root prim alone, so it’s one deletable script used in an item. It also allows to stretch pieces into one direction individually, so you can make things wider or narrower to adjust them to your shape. There is limitations in some cases, be sure to keep original box for backup or use the “restore” option if needed.

Please always adjust the placement of the prims on your avatar before resizing, as the attachment position on first wearing highly depends on the height of your shape, length of arms/legs, etc., so items attach for everybody slightly different. In most cases there is no resizing required even, just move it higher or lower, sometimes a little rotating forward/backwards helps too! You will find a picture guide in this box to explain how to edit the attachment point if you are unfamiliar with how to do it. :)

Please make sure to take a copy of the original items (or keep your original box for backup in the folder) before moding and feel free to delete the scripts out of this modded copy after you are done! Included is a notecard for all functions of the script.

UPDATES:
———-

The pack includes an object named !dM deviousMind “Tara” ** – CHECK FOR UPDATE (rezz) which will check for free upgrades to any of the content of this set. We’ve included this so you will be up-to-date on all changes that might occur of any of the items and scripts in this set.

Rezz the object and type “/12update” (without quotes) in open chat. You will receive your free upgrade should any be available.

If nothing happens, then there is likely none yet, or the sim you are in doesn’t allow scripts to run.

Check our blog for all info on updates:
http://chanimations.deviousmind.net/about/updated/

UPDATE TROUBLESHOOTING:
—————-

We’ve learned of times where the update script in the checker got corrupted with rezzing or unpacking and would not communicate to server proper. If you know an Update exists and your update item doesn’t connect at all to the server, please unpack a 2nd copy of the updater from your original box and try again with the fresh one. Usually you receive an update within a minute if it is available. It may take up to 5 though if you or the sim you are in is laggy, so please try a bit patience at least one time.

And as with everything scripted: Make sure you are in a sim that allows for scripts to run!

•
========================================
(*chanimations and
!dM deviousMind
========================================
•

Your first stop for anything Burlesque, PinUp and Fetish at deviousMind sim :)
——————————————–>

http://chanimations.deviousmind.net

https://marketplace.secondlife.com/stores/31565

http://www.flickr.com/groups/chanimations/

In-world Update Groups:
(*chanimations –> secondlife:///app/group/d114d452-96d2-73e5-b704-d7533ae248d3/about
!dM deviousMind – UPDATE Group –> secondlife:///app/group/535f7ee1-83e8-101c-8de7-53b0ab396a0a/about

•
======
“Mizz SexKitten”

BurlesqueCouture
by !dM deviousMind
======
•

Goth is timeless, Punk’s not dead. So this is our devious crossover mix (we’re pretty good at that anyhow) of glamPunk gothBurlesque with sexy leopard flavor :D

The costume is available at deviousBeauty in **ONYX**, **PEARL**, **CANARY**, **TANGERINE**, **RED**, **PINK**, **PURPLE**, **BLUE**, **MINT** and **KIWI** and of course if you can’t decide which one to go for (or the ultimate mix-and-match fun!!) as well as a **COLOR PACK** including a bonus color **BLOODRED**.

For “Mizz SexKitten”, we took a good portion of gothic romance with large, gorgeous roses, paired it with a tease of leopard laced lingerie and spiced it up with a spike studded underbust corset with latex rubber and leopard print and a chained choker around your neck. Not to forget the different bustles ranging from mini to impressive and roses for your hair.

The spiked underbust mesh corset comes in 4 sizes (XS, S, M and L) based on the standard sizing system and is made of vibrant colored leopard print with satin closing in front and black latex stripe accents. The corset comes with matching rose pasties and 5 different attachment options for bustles and a fitting chained and padlocked belt around the waist! The eclectic mix of color and black leopard net adds a very unique style mix to your inventory and will allow you to set the flavor of your styling as either plain sexkitten leopard lingerie or with all it’s attachment choices direct it towards goth romance, glamor punk, visual kei, or neo burlesque!

For clothing layers, you will find leopard stockings and armwraps, satin panties and laced bra with matching appliers for Lolas Tango (these will work on Lush as well, I learned!) and a low garterbelt as well as high-waisted garter option. Armwraps can be worn with optional lace attachments held by metalbands around the upper arm. A locked chain choker wraps around your neck, decorated with lace and roses, different styles of hair flowers, and a vibrant colored leopard makeup to round the glamorous styling off.

I’m sure you’ll have fun unpacking this one – please find all details of content after the content listing. ;)

Please take note, this costume requires a mesh compatible viewer as the style cannot be created with regular texture layers. Hair is not included in the package and worn in the vendor images are a wild mix of styles from other SL creators.

Also included is an UPDATE CHECK to keep you up to date with every piece of this outfit – this is an important part so make sure you know where it is :)

CONTENT:
———

You should find the following things in your new couture box (beware this will be long) – Permissions are (copy/no mod/no transfer) unless otherwise stated.

** in the following represents the color you purchased.

Clothing layers:
—————–

Alpha layer:
(copy/mod/no transfer)
• !dM SexKitten – underbustCorset Alpha/A
• !dM SexKitten – underbustCorset Alpha/B
• !dM SexKitten – underbustCorset Alpha/C
• !dM SexKitten – underbustCorset Alpha/C-mod v1

Tatoo layer:
• !dM SexKitten – stockings **BLACK**
• !dM SexKitten – makeUp eyes&lips **
• !dM SexKitten – makeUp eyes **
• !dM SexKitten – makeUp lips **

Socks Layer:
• !dM SexKitten – stockings **BLACK**

Gloves Layer:
• !dM SexKitten – armWraps **

Underpants and Pants Layers:
• !dM SexKitten – panties **
• !dM SexKitten – garterBelt **
• !dM SexKitten – garterBelt w/ panties **
• !dM SexKitten – waistGarterbelt/B **
• !dM SexKitten – waistGarterbelt/B w/ panties **

Undershirt and Shirt Layers:
• !dM SexKitten – bra **
• !dM SexKitten – waistGarterbelt/A **

Jacket Layer:
• !dM SexKitten – bra **
• !dM SexKitten – waistGarterbelt/A **

Lolas Tango Appliers:
—————-
(no copy/mo mod/no trans)

• !dM SexKitten ::Lolas Tango BRA applier:: bra **
• !dM SexKitten ::Lolas Tango TOP applier:: bra **

Rigged Mesh Corset:
———————

• !dM SexKitten – spiked underbustCorset/XS base **
• !dM SexKitten – spiked underbustCorset/S base **
• !dM SexKitten – spiked underbustCorset/M base **
• !dM SexKitten – spiked underbustCorset/L base **

• !dM SexKitten – underbustCorset/XS effect **LEOPARD LACE**
• !dM SexKitten – underbustCorset/S effect **LEOPARD LACE**
• !dM SexKitten – underbustCorset/M effect **LEOPARD LACE**
• !dM SexKitten – underbustCorset/L effect **LEOPARD LACE**

Prim attachments with resize & stretch option:
—————————————-

• !dM SexKitten – rosePasties ** (chest)
• !dM SexKitten – rosePasties w/ lace ** (chest)
• !dM SexKitten – Lolas rosePasties ** (chest)
• !dM SexKitten – Lolas rosePasties w/ lace ** (chest)

• !dM SexKitten – corsetTail miniBustle ** (pelvis)
• !dM SexKitten – corsetBustle Burlesque ** (pelvis)
• !dM SexKitten – corsetBustle roseSpikes ** (pelvis)
• !dM SexKitten – corsetBustle glamPunk ** (pelvis)
• !dM SexKitten – corsetBustle gothicGlam ** (pelvis)

• !dM SexKitten – chainChoker w/ leftRoses ** (chest)
• !dM SexKitten – chainChoker w/ rightRoses **(chest)
• !dM SexKitten – chainChoker w/ roses ** (chest)
• !dM SexKitten – chainChoker w/ laceCollar ** (chest)

• !dM SexKitten – laceCollar (add) **BLACK** (chest)

• !dM SexKitten – metalBands w/ lace (right)
• !dM SexKitten – metalBands w/ lace (right)
• !dM SexKitten – corsetChains (stomach)

• !dM SexKitten – hairRoses ** (chin)

Other Prim attachments:
——————–

• !dM SexKitten – hairRoses left ** (chin)
• !dM SexKitten – hairRoses right ** (chin)

Checking for Updates:
————————

• !dM deviousMind “SexKitten” – CHECK FOR UPDATE (rezz)
Please inform us if anything is missing, just make sure SL did unpack it all! (sometimes not all items are copied to your inventory, so please double-check by unpacking the box again in a low-lag zone before getting in touch with us)

Enjoy your new costume!

==========================
DETAILED INFORMATION
==========================

CORSET MESH:
———-

Rigged mesh cannot be adjusted in size or position on an avatar. For that reason, we’ve joined the idea of “Standard Sizing” and added sizes L, M, S and XS for the mesh corset. Please try the demos to make sure one of them fits you.

Testing the sizes with different avatar shapes, we found that most effective fit (if required) can be achieved with adjusting the sliders for separate/join cleavage and gravity/less gravity. You can easily close the gap that appears with some shapes at the lower back of the corset by adjusting the torso love handles slider. If you’re unsure, test it with the demos before :)

If you can’t see the mesh, please update your viewer.

TEXTURES and MESH:
———–

All textures and meshes for this set are original designs and have been created by Chandra Meehan for (*chanimations and deviousMind – if you find them used by anybody else not connected to us, please help protect original content in SL and immediately inform us!

Thank you very much in advance!

ALPHA LAYERS:
———

There is a variety of alpha layers included to make it all fit – if you can’t get to work regardlessly, we’ve included the textures full perm so you can download them to your computer and modify in a graphics program. Please understand we can’t help you or do it for you – there might be a little tutorial upcoming on our blog though once I have a bit more time to deal with it.

It shouldn’t need mention: the textures are for your personal use only and not to be used in any other form. Please respect my work and don’t pass these on full perm.

LOLAS TANGO APPLIERS:
—————-

Included in this set are appliers for Lolas Tango mesh breasts, created by Sandi Moonites. Please see creator profile for information where to acquire them and take note, the appliers will work with “Lolas Tango Appliers” compatible mesh breasts only (such as Lush).

Of course none of these mesh breasts are included in the outfit and sold by their respective creators.

Appliers and Lolas do sometimes “get stuck” with lag – if you’re hitting the applier HUD with no changes of your Lolas’ texture, please first check that the correct layer and corresponding HUD is being used (dress top or dress bra) and the sim you are in allows scripts. If it still won’t work, re-attach both Lolas and HUD and try again. Any further troubleshooting is out of my hand and needs to be taken to the creators of your mesh breasts.

RESIZE & STRETCH:
———————

We’ve taken special account to using a resize script, that operates from the root prim only! It allows you to stretch the pieces into one direction individually, so you can make things wider or narrower only to adjust them to your shape. There is limitations in some cases, be sure to keep original box for backup or use the “restore” option if needed.

Please always adjust the placement of the prims on your avatar before resizing, as the attachment position on first wearing highly depends on the height of your shape, length of arms/legs, etc., so items attach for everybody slightly different (higher or lower, sometimes a little rotating forward/backwards). In most cases there is no resizing required even. You will find a picture guide in this box to explain how to edit the attachment point if you are unfamiliar with how to do it. :)

Please make sure to take a copy of the original items (or keep your original box for backup in the folder) before moding and delete the scripts out of this modded copy after you are done! Included is a notecard for all functions of the script.

UPDATES:
———-

The pack includes an object named !dM deviousMind “SexKitten” ** – CHECK FOR UPDATE (rezz) which will check for free upgrades to any of the content of this set. We’ve included this so you will be up-to-date on all changes that might occur of any of the items and scripts in this set.

Rezz the object and type “/12update” (without quotes) in open chat. You will receive your free upgrade should any be available.

If nothing happens, then there is likely none yet, or the sim you are in doesn’t allow scripts to run.

Check our blog for all info on updates:

http://chanimations.deviousmind.net/about/updated/

UPDATE TROUBLESHOOTING:
—————-

We’ve learned of times where the update script in the checker got corrupted with rezzing or unpacking and would not communicate to server proper. If you know an Update exists and your update item doesn’t connect at all to the server, please unpack a 2nd copy of the updater from your original box and try again with the fresh one. Usually you receive an update within a minute if it is available. It may take up to 5 though if you or the sim you are in is laggy, so please try a bit patience at least one time.

And as with everything scripted: Make sure you are in a sim that allows for scripts to run!

•
======
“DivingDeep”
by (*chanimations
May 2013
======
•

To avoid confusion right from the start: the pose set does not include any mermaid costumes – there are so many gorgeous ones existing on the grid so we focused 100% on putting your tail into the right position rather than drawing scales – well… kinda. ;D

The idea of this pose set is very simple… the interaction of a mermaid with a school of fish – and a pretty one, at that! Swimming, diving, greeting – it has a few angles this meeting could go, so see what you can make out of it :) The prop itself works for one mermaid, but of course you may rezz additional posestands to fit as many as you like into your picture.

-DivingDeep- contains photography props and poses with the following properties:

9 POSES
(no mod/no transfer):
————————-

• (*fish_greeting,
• (*fish_cherish,
• (*fish_cherish_lookback,
• (*fish_side,
• (*fish_hold,
• (*fish_hold (mirror),
• (*fish_reach,
• (*fish_swimDown,
• (*fish_sideSit_lean

All POSES are static and come with ‘copy’ rights so you can put them into your posestands or make own poseball arrangements with the set.

PROPS (detailed info to each after listing):
———————————————-

Rezz:
(copy/no mod/no trans)

• (*chanimations – single rainbowFish – 12 PRIMS
• (*chanimations – 2 rainbowFish – 24 PRIMS
• (*chanimations – 3 rainbowFish – 36 PRIMS
• (*chanimations – 4 rainbowFish – 48 PRIMS

• (*chanimations – single rainbowFish **RADIANT** (FB fins) – 12 PRIMS
• (*chanimations – 2 rainbowFish **RADIANT** (FB fins) – 24 PRIMS
• (*chanimations – 3 rainbowFish **RADIANT** (FB fins) – 36 PRIMS
• (*chanimations – 4 rainbowFish **RADIANT** (FB fins) – 48 PRIMS

Rezz Optional:
(copy/no mod/no trans)

• (*chanimations – DivingDeep multiPosestand – 4 PRIMS
• (*chanimations – DivingDeep multiPoseball – 1 PRIM

=====================================
DETAILS ABOUT THE SET (The things to know)
=====================================

We have included 2 different versions of the rainbow fish. The difference between these two groups? One comes with normal “dark” fins, the other is set to “full bright” – FB has it’s place in some situations, and kills everything in others. With both options, you can rezz the one that suits your needs best :)

POSE MENU:
————–

There is one pose menu in the prop, you’ll find it in the root prim. Just sit on the fish, and any click on the prop will open the pose selection menu.

BUBBLES MENU:
——————-

There is optional large or small particle bubbles of course, too. The menu can be accessed when clicking the WHISKERS of the koi. It also allows, to set permissions to turn particles on/off.

The ability to use the poses and sit options are NOT affected by this menu.

TEXTURES:
———–

All textures for this set are custom made by Chandra Meehan for (*chanimations and deviousMind – if you find them used by anybody else not connected to us, please help protect original content and immediately inform us! Thank you in advance!

==========================================
GENERAL INFORMATION (which you might have already)
==========================================

ADJUSTMENT OF POSES with /1a:
————————————

Of course there’s no pose-balls – you sit directly on the rezzed prims!

The prop provides you with a pose adjustment menu to finetune your position – either use included gesture with hot-key [F10] (the gesture is mod, so you can change the key) or speak /1a in open channel for the adjustment menu to open (both will only work while sitting).

‘Postion’ will allow you to move your avartar more forward, backwards, left or right (X and Y axis) and of course up and down (Z axis), if needed ‘Rotation’ menu gives you more options for your adjustment.

The script remembers the avartar custom settings of its 100 most frequent users who adjusted their positions as long as the set stays rezzed.

*HOT-KEY?
———–

You’ve never worked with gestures? It’s easy, go into inventory and right click it, then select ‘activate’ in the context menu. Once activated, just press F10 key and the adjustment menu will open up if you sit on any of our (*chanimations props using this feature! Typing /adjustPose in chat will have the same effect, SL chat bar will auto-complete the command after the first few characters typed if it recognizes it being an active gesture. The gesture is mod, so you can change hot-key or command to whatever is easier for you, just double-click on the gesture in inventoy to open it.

PHOTOGRAPHER?
——————

To make it easier on photographers who work with models (or if you don’t want to adjust poses through a menu), a multiPosestand (4 PRIMS) is included. This way you can send your models afk and freely move them yourself instead of ‘instructing them’ where to place their avartar. Or you can use the included multiPoseball (1 PRIM).

While the posestand navigates through poses with arrow buttons, the multiPoseball needs to be triggerd by the one sitting on it and toggles the poses by using the pageUp/pageDown keys.

Both respond to /1show and /1hide to turn them invisible.

UPDATES:
———-

The prop includes an update script, which will check for free upgrades when it is rezzed – to not loose the information of your adjusted poses through rezzing, you can call for the update manually by typing “/12update” (without quotes) in open chat – or just rez another one from inventory :)

If nothing happens at all, there is likely no update existing yet. We keep you informed through our mainstore and our blog should a product have received an update: http://chanimations.deviousmind.net/about/updated/

BAD SCULPTIE RENDERING?
—————————-

If you have problems with sculpties seeming rough edged, please increase your LOD settings to 4.000 – you can do this either through advanced menu or the graphic settings. (This varies depending on which viewer you are using, please find out where to do it with your viewer’s support group.

Well this is the time to find out!

Thanks to one of my lovely friends who was as curious as you, I took some extra screenshots throughout the creation process so here’s a glimpse onto the working desk of my last costume release !dM “Endless Delirium”.

The idea for “Delirium” has some strange roots.. it started out as a possible idea for St. Patricks (cause I wanted a rainbow corset), then swayed into some sense of My Little Pony Kitsch (don’t even ask) and well… when I got the sculpted fish all the rainbows and clouds and fish came together into a picture for anybody who is familiar with “The Sandman” comic book series. So that’s when it took a hard cyberpunk turn instead of the fluff those first ideas were associated to.

I figure, if a fellow designer is curious enough about the in-between steps already, then it’s probably a fun read for somebody who never dealt with content creation in Second Life, too. So I put a little bit more time and effort into making this a proper documentary of the “Making Of…” for this costume than I would have if only sharing it with her.

These are all snapshots taken during different stages, and I will admit, I had so much fun preparing the “Making Of”, hope you will enjoy this little trip :) The pictures are totally random and taken most of times when I was thinking off it rather than any important milestones. (Although, there is one or two taken to discuss the turns on how this should go on from there lol)

It all started in 3D:
———–

Cause let’s not forget, there was a cloud attachment somewhere in the mix and nothing worthwhile on marketplace to consider.

I usually start with cubes no matter what it’ll be.. cylinders sometimes too, but a cube is just easier to deal with. This one here was ment to be something abstract anyhow, so making that happen didn’t take all too long thankfully to mirror modifiers.

Clicking on the pictures will make them large, btw. In the upper right and left hand area of each is an arrow that appears on mouse over, so you can just look at them in larger size.

From Blender to SL:
———-

Uploading and testing was good enough for a start. I stuck a bunch of rainbow flexis into this when first rezzing it in SL. And totally unassumingly went browsing the marketplace for anything fluffy and air-y to put into the mix; ironically I didn’t buy anything I had targetted but ended up with a fish instead. You see the grey ones sitting on the back of the cloud in the sceenshot below!

Admittedly, that did excite me way more than the rest at this point too, so there came the fatal question.. How can this be integrated?!

 And back off we go to come up with a texture for that beast. I had proper fish scales in mind, but then, it had to fit the rest of the base textures, so clearly all went down the abstract-fish route on the creation part. I think this was my favorite part of the whole costume designing, too!

Once those were done and uploaded came the next challenge. Getting them all placed in the cloud was easy. But what do with those butterflies, they totally didn’t fit any longer at all! Definitely had to be adjusted now too. D’uh. The result was acceptable though I’d say :D The swirls fit pretty nicely on there!

Now let’s dress the avatar!
———-

The corset part was clear already so lets fast-forward that. The mesh did exist as well as I had just finished it for our previous release !dM “Creme d’Elise” so it only needed a new texture. This was as well solved fairly fast with a new baking and more specular lights for a rubber/latex feel and then a lot of color stripe layers to get the rainbow on that corset. And a lot of color tweaking but that’s always the fun part. “Fairly fast” in my world means “It took only 2 hours instead of 50.” in case you wondered about that. :D

So texture layers now. They were supposed to be punky, grungy, eccentric. AND with the fish HAD to have fishnets :P

I settled on assymetric and with way large fishnet for contrast, as the smaller one was just not loud enough in comparison to the bright flashy attachments I had so far..  This was a first rough sketch on the left, and then the painful “making it straight lines” on the right side:

If you’re on the optimistic end of the scale, you would call this “meditative efforts”… if you’re more blunt, probably just a *longstringofcurses* PITA. I am sure there is faster ways to get to that goal but i do prefer working with vectors where possible.

Eventually there comes that first test to see all the mess on the avatar. Surreal looked at me somewhat funny which i totally can’t blame her for lol. They are still pretty rough drafted at this point and it’s hard to see through that if you don’t know where this is supposed to be heading. A few things became quickly obvious though:

• it needs white in the stockings;
• the skirt needs more black;
• the rainbow is too happy rainbow-brite-esque;
• we need matching shoes for the corset!
• I should not wear pink hair  :D  [I blame Elise and Gachas for that!]

 Finetuning:
———

Thanks to resources the shoe part was semi painless too, as I had just recently finished !dM “PeggySue” so really just needed a different texture for the main sides. Surprise, surprise, the corset texture rotated did hold up pretty good for that. With additional lights this was a keeper. Again, the one on that pic is not the final shoe that made it into the outfit box. It went through a bunch of more changes towards the final phase of the creating process – but it was close enough to let it sit for a while again and feel like “that part is done!”.

The crazy bustle went through some changes well as you can see, although still not finalized. The final version of textures was v5-2 so you get the drift, there was quite many still to come. :D

The stockings were done though other than some last-minute nit-picking when creating the final layers for boxing it up. Nobody would have noticed most likely.. but it’s one of those things, once you spot a flaw you cannot stop staring at it until it’s gone!

Playing with Prims!
————

Another of my favorite parts. When you see it all together in one screen frame is when it’s just most straight-forward to deal with. It jumped our sim primcount by quite a bit but I guess that’s what happens when you rezz EVERYTHING there could be rezzed. (this picture shows only a portion of what was all there LOL)

 You’ll notice the final rainbow hue is much darker now, and that non-pink hair suits me better too ;) Pretty happy with this stage by now, which is close before linking it all up and putting it in a box. This was wednesday afternoon and I was set to release at the evening.

IF there wasn’t yet again that tiny little detail that popped in my mind and postponed this for what seems an eternity.

Scripting – your best friend and nightmare:
———

In my mind, it was all fast and awesome.. “Quick particle script, target, fish-on-a-leash, YAY!”

Well.. that’s the part where the scripters amongst you start to giggle already I’m sure. The very FIRST fish-on-a-leash was ridiculously fast and met all my expectations regarding “ease” and “time” needed…. only turns out, SL gives new asset keys every time you rezz a prim. D’uh.

So how make that damn fish know where to send it’s leash too? 

And that’s where the real time consuming part started that delayed release all the way to saturday morning. Thankfully my scripter friends got me onto the right track, and eventually the thing DID throw a leash when attaching. Best moment ever, for real!

Now just the last part, which takes a while but that was planned in at least… and a very welcome in-between activity when I was ready to rage-quit the script.

Creating the vendor picture:
———–

When speaking about Delirium to my friend Honey, she suggested to make it a comicbook style for display – which I LOVED that idea instantly, as it also made it pretty easy to show the different angles and combinations for the outfit each in its own pannel rather then clumping it all together with that poofy skirt bustle! :D

This went from the individual shots to pannel draft, adding detail, and adding more detail.  Click the image for large view!

Finally it all ended up in a box and got into a vendor and since there was so much free space left to both sides, I ended up making an an inworld gallery display of snapshots too. (With some different pics as there’s some snapshots inworld that i didn’t download.)

And with that, we’ve reached the end of this little trip behind the scenes. I hope you enjoyed reading through this as much as I had fun writing it all up for you! And since this is a pretty fun way to look back on a creation, I may share some of these “Making Of..”s more frequently (where “frequently” in my world means probably once or twice a year :D)

Special thanks:
——–

I started designing this costume in the beginning of March… (remember? St. Patricks and all…) Obviously that all took total different turns and there’s a lot of time passed since then and it got bent into different directions [WITH the obvious rage-quit in between too of course!].

Special thanks goes for that reason to Elise, Surreal and Honey – cause for one, they kept bravely looking at all the inbetweens and kept answering all my nit-picky questions and astray throughts of randomness with pretty helpfull feedback, and of course made the staring at prims a lot more fun. Cause really, moving prims around is more fun when there is somebody either doing the same next to you or sprouts off random madness in your IM box to trigger more ideas. And then another big thank you to Rug and Charlie for pointing my nose into the right direction with the silly fish leash :)

Very happy how it all came together!

•
======
“Endless: Delirium”

BurlesqueCouture
by !dM deviousMind
======
•

Delirium is the youngest of the Seven Endless, yet still older than the rest of existence. One of her eyes is silver-flecked blue, and the other is green. Her hair changes style and color constantly, as do her clothes. Her shadow never reflects her shape, and is tangible, like velvet. She is said to smell of sweat, late nights, sour wine, and old leather. Her realm is a chaotic, constantly changing mass of colors and strange objects and shapes. She may even appears as hundreds of colorful fishes.

…and she stepped out of The Dreaming right onto the grid.

Delirium is the first of a series of fanart I am planning to create surrounding “The Endless” by Neil Gaimann, which, to my surprise, appears to be unfamiliar to most on the grid. Read up on her at wikipedia if you like!

The underbust mesh corset comes in 4 sizes (XS, S, M and L) based on the standard sizing system and is made of vibrant colors in a latex-like rainbow scale. The corset comes with matching attachment options for a little miniSkirt bustle or long skirt tail option, just ruffles and ornaments, or if you would like to go all out on the abstract, a fluffy cloud wrapping around your hips with rainbow fish and butterflies surrounding it – and not to forget the softly floating flexi tails to go with it! The eclectic mix of color and black ripped net adds a very unique style mix to your inventory, with a hint of punk, a touch of visual kei, and a lot of neo burlesque tease!

Delirium comes as well with rainbow boots in 3 rigged mesh sizes as well as one unrigged version with resize options for a perfect fit. For clothing layers, you will find patchwork stockings and netted armwraps, an asymetric net top with matching appliers for Lolas Tango (these will work on Lush as well, I learned!) and little black satin string panties. She likes to impress, so to make a point Delirium brings her spiked metal bands along as well, for upper arms, wrists, upper thigh and knee and not to forget a spiked metal collar with bow and butterfly in 3 colors to pick from. Add eyeshadow in vibrant rainbow hues and an impressive headpiece with rainbow fish and butterflies, optionally with or without flexi laces.

Of course she wouldn’t go out without her favorite fish on a leash, either! All in all, you’ll have fun unpacking this one – please find all details of content after the content listing. ;)

Please take note, this costume requires a mesh compatible viewer as the style cannot be created with regular texture layers. Hair is not included in the package and worn in the vendor images are a wild mix of styles from other SL creators.

Also included is an UPDATE CHECK to keep you up to date with every piece of this outfit – this is an important part so make sure you know where it is :)

You should find the following things in your new couture box (beware this will be long)
- unless otherwise stated, permissions are (copy/no mod/no transfer):

Mesh Boots:
———-

• !dM Delirium – tiedBoots (unrigged) **DARK RAINBOW** (left & right)

• !dM Delirium – tiedBoots/S **DARK RAINBOW** (left & right)
• !dM Delirium – tiedBoots/M **DARK RAINBOW** (left & right)
• !dM Delirium – tiedBoots/L **DARK RAINBOW** (left & right)

• !dM Delirium – boots base
• !dM Delirium – boots Alpha

Prim Eyes:
————–

• !dM Delirium – twoColored eyes **SUMMERFOREST/L** (right)
• !dM Delirium – twoColored eyes **ICEBLUE/L** (left)

• !dM Delirium – twoColored eyes alpha (add)
(this way you can hide your avatar eyeballs)

Clothing layers:
—————–

Alpha layer:
• !dM Delirium – underbustCorset Alpha/A
• !dM Delirium – underbustCorset Alpha/B
• !dM Delirium – underbustCorset Alpha/C
• !dM Delirium – underbustCorset Alpha/C-mod v1

Tatoo layer:
• !dM Delirium – eyeShadow makeUp **DARK RAINBOW**
• !dM Delirium – armWraps **DARK RAINBOW**
• !dM Delirium – patchworkStockings **DARK RAINBOW**
• !dM Delirium – patchworkStockings & armWraps **DARK RAINBOW**
• !dM Delirium – stockings, armWraps & makeUp **DARK RAINBOW**

Socks Layer:
• !dM Delirium – patchworkStockings (footpart) **DARK RAINBOW*

Panties Layer:
• !dM Delirium – panties **BLACK RAINBOW*
• !dM Delirium – patchworkStockings **DARK RAINBOW*

Pants Layer:
• !dM Delirium – panties **BLACK RAINBOW**

Undershirt, Shirt and Jacket Layer:
• !dM Delirium – netTop **BLACK RAINBOW**

Lolas Tango Appliers:
—————-
(no copy/mo mod/no trans)

• !dM Delirium ::Lolas Tango BRA applier:: netTop **BLACK**
• !dM Delirium ::Lolas Tango TOP applier:: netTop **BLACK**

Rigged Mesh Corset:
———————

• !dM Delirium – underbustCorset/XS **DARK RAINBOW**
• !dM Delirium – underbustCorset/S **DARK RAINBOW**
• !dM Delirium – underbustCorset/M **DARK RAINBOW**
• !dM Delirium – underbustCorset/L **DARK RAINBOW**

• !dM Delirium – underbustCorset/XS w/shine **DARK RAINBOW**
• !dM Delirium – underbustCorset/S w/shine **DARK RAINBOW**
• !dM Delirium – underbustCorset/M w/shine **DARK RAINBOW**
• !dM Delirium – underbustCorset/L w/shine **DARK RAINBOW**

Prim attachments with resize & stretch option:
—————————————-

• !dM Delirium – cloudFishes bustle (pelvis)
• !dM Delirium – cloudFishes tail (add) **DARK RAINBOW** (pelvis)

• !dM Delirium – corsetMiniskirt **DARK RAINBOW** (pelvis)
• !dM Delirium – corsetSkirt **DARK RAINBOW** (pelvis)
• !dM Delirium – corsetTail (plain) **DARK RAINBOW** (pelvis)

• !dM Delirium – corsetOrnaments (stomach)
• !dM Delirium – corsetFrills w/rainbowFish (pelvis)
• !dM Delirium – corsetFrills w/butterflies (pelvis)

• !dM Delirium – headDress (chin)
• !dM Delirium – headDress rainbowFish (chin)

• !dM Delirium – metalCollar w/butterfly **RED** (chest)
• !dM Delirium – metalCollar w/butterfly **PURPLE** (chest)
• !dM Delirium – metalCollar w/butterfly **GREEN** (chest)
• !dM Delirium – metalBands arm (left)
• !dM Delirium – metalBands arm (right)
• !dM Delirium – metalBands wrist (left)
• !dM Delirium – metalBands wrist (right)
• !dM Delirium – metalBands leg (left)
• !dM Delirium – metalBands knee (left)

Other Prim attachments:
——————–

• !dM Delirium – fish-on-a-string (left shoulder)
• !dM Delirium – fishLeash target (left hand)

• !dM Delirium – Butterfly **RED** (right hand)
• !dM Delirium – Butterfly **GREEN** (right hand)
• !dM Delirium – Butterfly **PINK** (right hand)

Checking for Updates:
————————

• !dM deviousMind “Delirium” – CHECK FOR UPDATE (rezz)

Please inform us if anything is missing, just make sure SL did unpack it all! (sometimes not all items are copied to your inventory, so please double-check by unpacking the box again in a low-lag zone before getting in touch with us)

Enjoy your new costume!

==========================
DETAILED INFORMATION
==========================

CORSET MESH:
———-

Rigged mesh cannot be adjusted in size or position on an avatar. For that reason, we’ve decided to join the idea of “Standard Sizing” and added sizes L, M, S and XS for the mesh corset. Please try the demos to make sure one of them fits you.

Testing the sizes with different avatar shapes, we found that most effective fit (if required) can be achieved with adjusting the sliders for separate/join cleavage and gravity/less gravity. You can easily close the gap that appears with some shapes at the lower back of the corset by adjusting the torso love handles slider. If you’re unsure, test it with the demos before :)

If you can’t see the mesh, please update your viewer.

BOOTS MESH:
———-

The boots are included in both rigged and unrigged mesh to take advantage of whichever style you prefer.

The unrigged version comes with a resize and stretch option so you can adjust the fit precisely to your avatar without the drawbacks rigged mesh has if not fitting your shape. Please make sure to keep a copy of the original items (or keep your original box for backup in the folder). The script can be deleted of course.

For the rigged mesh, you can grab free demos at !dM mainstore or get them from marketplace. Please be sure to test these if you’re mainly interested in the rigged mesh which moves foot and ankles with your AO.
Rigged mesh cannot be adjusted on your avatar, so you will need to pick one of the 3 sizes that is the closest fit and possibly modify your shape for proper fitting. If you’re unsure if you can work it out, please get the demo and test it!

The mesh used for this creation is a semi-exclusive mesh purchased item for content creation. There’s 10 stores maximum which may use these meshes, so if you’re lucky you own one of them already so there’s no size adjustments of your shape required anymore :) Enjoy!

TEXTURES and MESH:
———–

All textures and meshes (except the beforementioned boots) for this set are original designs and have been created by Chandra Meehan for (*chanimations and deviousMind – if you find them used by anybody else not connected to us, please help protect original content in SL and immediately inform us!

Thank you very much in advance!

ALPHA LAYERS:
———

There is a variety of alpha layers included to make it all fit – if you can’t get to work regardlessly, we’ve included the textures full perm so you can download them to your computer and modify in a graphics program. Please understand we can’t help you or do it for you – there might be a little tutorial upcoming on our blog though once I have a bit more time to deal with it.

It shouldn’t need mention: the textures are for your personal use only and not to be used in any other form. Please respect my work and don’t pass these on full perm.

LOLAS TANGO APPLIERS:
—————-

Included in this set are appliers for Lolas Tango mesh breasts, created by Sandi Moonites. Please see creator profile for information where to acquire them and take note, the appliers will work with “Lolas Tango Appliers” compatible mesh breasts only (such as Lush).

Of course none of these mesh breasts are included in the outfit and sold by their respective creators.

Appliers and Lolas do sometimes “get stuck” with lag – if you’re hitting the applier HUD with no changes of your Lolas’ texture, please first check that the correct layer and corresponding HUD is being used (dress top or dress bra) and the sim you are in allows scripts. If it still won’t work, re-attach both Lolas and HUD and try again. Any further troubleshooting is out of my hand and needs to be taken to the creators of your mesh breasts.

RESIZE & STRETCH:
———————

We’ve taken special account to using a resize script, that operates from the root prim only! It allows you to stretch the pieces into one direction individually, so you can make things wider or narrower only to adjust them to your shape. There is limitations in some cases, be sure to keep original box for backup or use the “restore” option if needed.

Please always adjust the placement of the prims on your avatar before resizing, as the attachment position on first wearing highly depends on the height of your shape, length of arms/legs, etc., so items attach for everybody slightly different (higher or lower, sometimes a little rotating forward/backwards). In most cases there is no resizing required even. You will find a picture guide in this box to explain how to edit the attachment point if you are unfamiliar with how to do it. :)

Please make sure to take a copy of the original items (or keep your original box for backup in the folder) before moding and delete the scripts out of this modded copy after you are done! Included is a notecard for all functions of the script.

UPDATES:
———-

The pack includes an object named !dM deviousMind “Delirium” – CHECK FOR UPDATE (rezz) which will check for free upgrades to any of the content of this set. We’ve included this so you will be up-to-date on all changes that might occur of any of the items and scripts in this set.

Rezz the object and type “/12update” (without quotes) in open chat. You will receive your free upgrade should any be available.

If nothing happens, then there is likely none yet, or the sim you are in doesn’t allow scripts to run.

Check our blog for all info on updates:
http://chanimations.deviousmind.net/about/updated/

UPDATE TROUBLESHOOTING:
—————-

We’ve learned of times where the update script in the checker got corrupted with rezzing or unpacking and would not communicate to server proper. If you know an Update exists and your update item doesn’t connect at all to the server, please unpack a 2nd copy of the updater from your original box and try again with the fresh one. Usually you receive an update within a minute if it is available. It may take up to 5 though if you or the sim you are in is laggy, so please try a bit patience at least one time.

And as with everything scripted: Make sure you are in a sim that allows for scripts to run!

•
======
SugarRush #12
“MintStrip”

by (*chanimations
April 2013
======
•

(*chanimations SugarRush takes you onto a sweet journey with a seductive and humorous pin up pose series, consisting of 12 individual sets of sweets, cake and candy!

-MintStrip- is set #12 of SugarRush series. It’s the ultimate cupcake tease. The freshest experience. The thing you want to wrap your mind around. In short, it’s just the thing you’re go down for in any random strip joint… i mean.. cupcake store.

If that’s not enough for you, you may also go for the ultimate sweet-tooth: We’ve released as well a CalendarPack with all sets and menu driven background photobox to let you create your own SugarRush vintage PinUp calender… or another poster for your fridge… or Valentine’s Day sweetness and Birthday greetings… or whatever. ;) It’s basically the long awaited part 2 of our (*chanimations fruitFetish! calendar series of 2009 only with more sugar :D

(*chanimations -MintStrip- contains photography props and poses with the following properties:

9 POSES
(no mod/no transfer):
————————-

• mint_pole,
• mint_pole (turn),
• mint_pole (open),
• mint_pole_halfKneel,
• mint_pole_halfKneel (legUp),
• mint_pole_bend (legUp),
• mint_pole_bend (legStraight),
• mint_pole_bend,
• mint_pole_lean

All POSES are static and come with ‘copy’ rights so you can put them into your posestands or make own poseball arrangements. To match the nature of the series, all poses are designed to look best with high heels, of course :D

PROPS (detailed info to each after listing):
———————————————-

Rezz:
(copy/no mod/no trans)

• (*chanimations SugarRush – Mint Chocolate Cupcakes (highDetail) – 44 PRIMS
• (*chanimations SugarRush – Mint Chocolate Cupcakes – 32 PRIMS
• (*chanimations SugarRush – Mint Chocolate Cupcakes (LP) – 22 PRIMS

Rezz Optional:
(copy/no mod/no trans)

• (*chanimations – MintStrip multiPosestand – 4 PRIMS
• (*chanimations – MintStrip multiPoseball – 1 PRIM

• (*chanimations SugarRush #12 “MintStrip” (wallFrame) – 4 PRIMS
• (*chanimations sugarRush – Mint Chocolate Cupcakes (tableDecor) – 44 PRIMS

COLOR and POSE MENU:
—————————-

There are two areas you need to know about to access the menus easily.

POSE menu is placed in the root prim of this set. Any part that you click will trigger it, except the prim that holds the COLOR menu! Remember the /1a chat command to adjust your avatars position, more about this further down.

The COLOR menu is placed in the lower cupcake wrapper. Here you control special effects (turn sparkles on/off) and change the glossyness of your cupcakes. It also allows you to set permissions who may access the color menu (public/group/owner), use of poses is not affected by this selection. Default setting on rezz is OWNER.

=====================
GENERAL INFORMATION
=====================

ADJUSTMENT OF POSES with /1a:
————————————

Of course there’s no pose-balls – you sit directly on the prop!

The pose engine provides you with an adjustment menu to finetune your position – either use included gesture with hot-key [F10] (the gesture is mod, so you can change the key) or speak /1a in open channel for the adjustment menu to open (both will only work when sitting on the prop).

‘Postion’ moves your avartar forward, backwards, left or right (X and Y axis) or up and down (Z axis), if needed ‘Rotation’ menu gives you more options for your adjustment.

The script remembers the avartar custom settings of its 100 most frequent users who adjusted their positions as long as the prop stays rezzed.

PHOTOGRAPHER?
——————

To make it easier on photographers who work with models (or if you don’t want to adjust poses through a menu), a multiPosestand (4 PRIMS) is included. This way you can send your models afk and freely move them yourself instead of ‘instructing them’ where to place their avartar. Or you can use the included multiPoseball (1 PRIM).

While the posestand navigates through poses with arrow buttons, the multiPoseball needs to be triggerd by the one sitting on it and toggles the poses by using the pageUp/pageDown keys.

Both respond to /1show and /1hide to turn them invisible.

And as with everything scripted: Make sure you are in a sim that allows for scripts to run!

UPDATES:
———-

The pose props include an update script which will check for free upgrades to any of the content of this set. We’ve included this so you will be up-to-date on all changes that might occur of any of the items and scripts in this (*chanimations release.

When rezzing, it will take a short while before the update client connects to our server and you will receive your free upgrade should any be available. In case when it doesn’t automatically connect, you can call for the update manually by typing “/12update” (without quotes) in open chat when standing next to the object.

We keep you informed about item updates through our mainstore by signs at the vendor. Updates are as well listed on our blog: http://chanimations.deviousmind.net/about/updated/

UPDATE TROUBLESHOOTING:
—————-

We’ve learned of times where the update script in the checker got corrupted with rezzing or unpacking and would not communicate to server proper. If you know an Update exists and your update item doesn’t connect at all to the server, please unpack a 2nd copy of the updater from your original box and try again with the fresh one. Usually you receive an update within a minute if it is available. It may take up to 5 though if you or the sim you are in is laggy, so please try a bit patience at least one time.

And as with everything scripted: Make sure you are in a sim that allows for scripts to run!

BAD SCULPTIE RENDERING?
—————————-

If you have problems with sculpties seeming rough edged, please increase your LOD settings to 4.000 – you can do this either through advanced menu or the graphic settings. (This varies depending on which viewer you are using, please find out where to do it with your viewer’s support group.

TEXTURES:
———–

Most textures for this set are custom made by Chandra Meehan for (*chanimations and deviousMind – if you find them used by anybody else not connected to us, please help protect original content and immediately inform us! Thank you in advance!

•
======
SugarRush #11
“Waffellatio?!”

by (*chanimations
April 2013
======
•

(*chanimations SugarRush takes you onto a sweet journey with a seductive and humorous pin up pose series, consisting of 12 individual sets of sweets, cake and candy!

-Waffellatio?!- is set #11 of SugarRush series. Do you see now why we’re located at deviousMind when first thing that comes to mind with waffels and vanila sticks is…. smut. :D Well join us in honey and butter, it’s here to stay, and for you to enjoy now too!

If that’s not enough for you, you may also go for the ultimate sweet-tooth: We’ve released as well a CalendarPack with all sets and menu driven background photobox to let you create your own SugarRush vintage PinUp calender… or another poster for your fridge… or Valentine’s Day sweetness and Birthday greetings… or whatever. ;) It’s basically the long awaited part 2 of our (*chanimations fruitFetish! calendar series of 2009 only with more sugar :D

(*chanimations -Waffellatio?!- contains photography props and poses with the following properties:

7 (9) POSES
(no mod/no transfer):
————————-

• (*waffle_kneel,
• (*waffle_groundSit_lips (optionA),
• (*waffle_groundSit_lips (optionB),
• (*waffle_groundSit_lips (optionC),
• (*waffle_groundSit,
• (*waffle_groundSit_turn,
• (*waffle_groundSit_turnUp,
• (*waffle_groundLean,
• (*waffle_groundLean (tease)

All POSES are static and come with ‘copy’ rights so you can put them into your posestands or make own poseball arrangements. To match the nature of the series, all poses are designed to look best with high heels, of course :D

PROPS (detailed info to each after listing):
———————————————-

Rezz:
(copy/no mod/no trans)

• (*chanimations SugarRush – Belgium Waffles w/ Honey&Butter – 20 PRIMS
• (*chanimations SugarRush – Belgium Waffles w/ Honey&Butter – 12 PRIMS

Rezz Optional:
(copy/no mod/no trans)

• (*chanimations – Waffellatio multiPosestand – 4 PRIMS
• (*chanimations – Waffellatio multiPoseball – 1 PRIM

• (*chanimations SugarRush #11 “Waffellatio?!” (wallFrame) – 4 PRIMS
• (*chanimations sugarRush – Belgium Waffles (tableDecor) – 20 PRIMS

COLOR and POSE MENU:
—————————-

There are two areas you need to know about to access the menus easily.

POSE menu is placed in the root prim of this set. Any part that you click will trigger it, except the prim that holds the COLOR menu! Remember the /1a chat command to adjust your avatars position, more about this further down.

The COLOR menu is placed in the waffle plate. Here you control special effects (turn sparkles on/off) and change colors of the plate itself. It also allows you to set permissions who may access the color menu (public/group/owner), use of poses is not affected by this selection. Default setting on rezz is OWNER.

=====================
GENERAL INFORMATION
=====================

ADJUSTMENT OF POSES with /1a:
————————————

Of course there’s no pose-balls – you sit directly on the prop!

The pose engine provides you with an adjustment menu to finetune your position – either use included gesture with hot-key [F10] (the gesture is mod, so you can change the key) or speak /1a in open channel for the adjustment menu to open (both will only work when sitting on the prop).

‘Postion’ moves your avartar forward, backwards, left or right (X and Y axis) or up and down (Z axis), if needed ‘Rotation’ menu gives you more options for your adjustment.

The script remembers the avartar custom settings of its 100 most frequent users who adjusted their positions as long as the prop stays rezzed.

PHOTOGRAPHER?
——————

To make it easier on photographers who work with models (or if you don’t want to adjust poses through a menu), a multiPosestand (4 PRIMS) is included. This way you can send your models afk and freely move them yourself instead of ‘instructing them’ where to place their avartar. Or you can use the included multiPoseball (1 PRIM).

While the posestand navigates through poses with arrow buttons, the multiPoseball needs to be triggerd by the one sitting on it and toggles the poses by using the pageUp/pageDown keys.

Both respond to /1show and /1hide to turn them invisible.

And as with everything scripted: Make sure you are in a sim that allows for scripts to run!

UPDATES:
———-

The pose props include an update script which will check for free upgrades to any of the content of this set. We’ve included this so you will be up-to-date on all changes that might occur of any of the items and scripts in this (*chanimations release.

When rezzing, it will take a short while before the update client connects to our server and you will receive your free upgrade should any be available. In case when it doesn’t automatically connect, you can call for the update manually by typing “/12update” (without quotes) in open chat when standing next to the object.

We keep you informed about item updates through our mainstore by signs at the vendor. Updates are as well listed on our blog: http://chanimations.deviousmind.net/about/updated/

UPDATE TROUBLESHOOTING:
—————-

We’ve learned of times where the update script in the checker got corrupted with rezzing or unpacking and would not communicate to server proper. If you know an Update exists and your update item doesn’t connect at all to the server, please unpack a 2nd copy of the updater from your original box and try again with the fresh one. Usually you receive an update within a minute if it is available. It may take up to 5 though if you or the sim you are in is laggy, so please try a bit patience at least one time.

And as with everything scripted: Make sure you are in a sim that allows for scripts to run!

TEXTURES:
———–

Most textures and sculptmaps (butter/waffles/vanilla) for this set are custom made by Chandra Meehan for (*chanimations and deviousMind – if you find them used by anybody else not connected to us, please help protect original content and immediately inform us! Thank you in advance!