Archive for the ‘(*VintageCircus’ Category

(*chanimations VintageCircus: “TrapezDuo”

“Ladies and Gentlemen, boy and girls, children of all ages……”

TrapezDuo_014_blog


======
-The TrapezDuo-
Vintage Circus Set
======

-The TrapezDuo- contains photography props and poses with the following properties:

TrapezDuo_set_blog

10 POSES / 5 COUPLE POSES:
——————————–

(copy/no mod/no transfer)

• (*trapezDuo (stand),
• (*trapezDuo (sit),
• (*trapezDuo_show (stand),
• (*trapezDuo_show (sit),
• (*trapezDuo_square (hold),
• (*trapezDuo_square (hang),
• (*trapezDuo_onLeg (hold),
• (*trapezDuo_onLeg (hang),
• (*trapezDuo_wrap (hold),
• (*trapezDuo_wrap (hang),

All POSES are static and come with ‘copy’ rights so you can put them into your posestands or make own poseball arrangements.

PROPS:
——–

(copy/no mod/no transfer)

• (*chanimations – Circus DoubleTrapez (5m)
• (*chanimations – Circus DoubleTrapez (7.5m)
• (*chanimations – Circus DoubleTrapez (10m)

POSE MENUS and SIT TARGETS:
——————————————-

The trapez will start swinging as soon as one person sits on one of the sit targets – these are placed directly in the metal bar for pose menu #2 (I suggest you to have the first person sitting there directly cause it’s more difficult to target), and pose menu #1 is placed in an invisible prim covering the lower part of the swing in a rather large area (once you see the mouse pointer change to a chair, just click to sit).

Poses for both partners are synchronized, so only one of you needs to select the next pose. To make this easy to use even while swinging, you have two options: Person on spot #1 can cycle you through by clicking the large transparent prim area around them, or person on spot #2 can use the included gesture and call for the menu by pressing a hotkey. (I set it to F9, but you are free to change that to whatever you like of course :D)

You can turn the swinging on/off by clicking the menu on the upper part of the ropes (by default, the menu works for Owner only, so make sure to change the permissions to group or anybody if you allow others to use the menu too).

Toggle transparency on/off (CTRL-ALT-T) for a first impression of what is where till you’re used to handle the menues :)

And as with everything scripted: Make sure you are in a sim that allows for scripts to run!

For a successful Show!

Read the rest of this entry »

(*chanimations VintageCircus: “A Tale of Fortune”

“Ladies and Gentlemen, boy and girls, children of all ages……”

TaleOfFortune_set_blog


======
-A Tale of Fortune-
Vintage Circus Set
======

-A Tale of Fortune- contains photography props and poses with the following properties:

10 (8) POSES (no mod/no transfer):
——————————–

Seer:
• (*fortuneWelcome,
• (*fortuneFocus,
• (*fortuneSelect,
• (*fortuneSelect (point),
• (*fortuneSeer,
• (*fortuneSeer (wrap),

Seeker:
• (*seeker_listen,
• (*seeker_participate,
• (*seeker_surprise,
• (*seeker_surprise (longArms)

All POSES are static and come with ‘copy’ rights so you can put them into
your posestands or make own poseball arrangements.

Two of the poses come in different versions: (*fortuneSelect to match your storytelling (hand gesture),
and (*seeker_surprise to work with different length of arms (hand position)

PROPS (detailed info to each after listing):
———————————————-

Rezz:
(copy/no transfer/no modify)
• (*chanimations Fortune’s Table (w/chair) – 50 PRIMS
• (*chanimations Fortune’s Table (LP) (w/chair) – 39 PRIMS
• (*chanimations Fortune’s Table (w/o chair) – 39 PRIMS
• (*chanimations Fortune’s Table (LP) (w/o chair) – 29 PRIMS
• (*chanimations Seeker’s Chair – 11 PRIMS
• (*chanimations Fortune’s Tent – 27 PRIMS

Rezz optional:
• (*chanimations ‘A Tale of Fortune’ Seer multiPoseball – 1 PRIM
• (*chanimations ‘A Tale of Fortune’ Seeker multiPoseball – 1 PRIM
• (*chanimations Fortune’s gypsyChair – 11 PRIMS (decor only w/o poses)

Attachments:
(transfer/no copy/no modify)
• (*chanimations tarotCard (right hand)

Read the rest of this entry »

(*TravellingCircus & HalloweenCircus prefabs

“Ladies and Gentlemen, boys and girls, children of all ages……”

AllCircus_DoublePack_Ad


========================================
“HalloweenCircus” & “TravellingCircus” DoublePack
by !dM deviousMind and (*chanimations
========================================

It’s Halloween time coming – and cause we all love creepy things, we’ve created along with the release of the tent we use as our current (*chanimations VintageCircus mainstore, a bloody psycho-circus tent version as well!

Unlike the circus photoStage, this one is a full build to rezz on the ground and/or include in your sim-structure. It comes in two different version, as ‘clean’ (*TravellingCircus or bloody&dirty (*HalloweenCircus – and if you’d like both together, in a Halloween&TravellingCircus DoublePack.
(please click the respective links if you would like to view the offers on xStreet)

As with all our products, with much love for the detail, high quality custom textures and – whimsical creepyness! *evilsmirk* So, let’s look behind the curtains for the facts:

“Ladies and Gentlemen, boy and girls, children of all ages……”
*a truely off-sounding tune starts playing*


======
DETAILED INFORMATION
(please read!)
======

“HalloweenCircus” takes care of the darker side of entertainment of our VintageCircus series and offers the perfect background blend to all the current and future sets availabe – or simply as build on its own! The build itself does not contain any poses, and is noticably smaller than our previously released circus photostage, which makes it well suitable to stay rezzed on groundlevel. – We’ve included you a big, black watchdo…— well… SPIDER. *smirks* – And for the right circus-feeling of the TravellingCircus, we’ve included a pidgeon and some balloons to rezz around the tent – or just hold in hand!

The lights in the roof of the circus tent react on touch and can be turned on/off by clicking them. Please keep in mind: To see glow and light, it requires for at least ‘basic shaders’ and ‘nearby local lights’ being enabled in preferences – if lights on/off still doesn’t work (as with everything scripted) make sure you are in a sim that allows for scripts to run!

FOOTPRINT
————

The tent itself is built on a footprint of 24x24m, with parts of the overlapping roof and ropes tied to the ground it extends to approximately 35x35m meter though. Height is an estimated 35m. You can grab a demo-footprint at our mainstore to take home and rezz to see if this works for you – the little lip is where the entrance of the tent is!

CONTENT & PRIMCOUNTS
—————————–

To match up with all needs, primcounts, and seasons, the pack includes three different versions of the circus tent with the following primcounts:

HalloweenCircus_Ad_512x512

(*HalloweenCircus:

HIGH-PRIM – The true and creepy Halloween 2009 version:

(*HalloweenCircus (HP) total of 127 PRIMS
(copy/no transfer/no mod)

  • (*chanimations halloweenCircus (HP) tent with 88 PRIMS
  • (*chanimations halloweenCircus – spiderCurtains <phantom>
    with many spiders and 39 PRIMS
HIGH-PRIM – Creepy enough, but without all those ’8-legged unwanted pets’:

HalloweenCircus with a total of 104 PRIMS (copy/no transfer/no mod)

  • (*chanimations halloweenCircus tent with 85 PRIMS
  • (*chanimations halloweenCircus – ornamentCurtains <phantom>
    consisting of 19 PRIMS
LOW-PRIM – Tent without the ropes connecting to the ground:

HalloweenCircus (LP) – total of 56 PRIMS (copy/no transfer/no mod)

  • (*chanimations halloweenCircus (LP) tent with 49 PRIMS
  • (*chanimations halloweenCircus – plainCurtains (LP) <phantom>
    consisting of 7 PRIMS

TravellingCircus_Ad_512x512

(*TravellingCircus:

HIGH-PRIM – tent with ropes to the ground:

HalloweenCircus – total of 104 PRIMS
(copy/no transfer/no mod)

  • (*chanimations circusTent tent with 85 PRIMS
  • (*chanimations circusTent – ornamentCurtains <phantom>
    consisting of 19 PRIMS
LOW-PRIM – Tent without the ropes connecting to the ground:

HalloweenCircus (LP) total of 56 PRIMS
(copy/no transfer/no mod)

  • (*chanimations circusTent (LP) tent with 49 PRIMS
  • (*chanimations circusTent – plainCurtains <phantom>
    consisting of 7 PRIMS

Other Information:
——————–

As phantom parts cannot be linked to non-phantom parts, each of the above versions comes in an unlinked group of tent and curtains (2 pieces) – so make sure you have them selected as well when moving/rotating the tent for final placement – You do this by keeping [Shift] key pressed, then right-click choose ‘edit’ on the curtains, and (with still pressed shift key) right-click choose ‘edit’ on the tent. When both are highlighted with the blue/yellow lines, you can let go of [shift] and everything moves as a group now. – in worst case, re-rezz from inventory to go back to the original alignment.

All curtains are included as well separate, that way you can rezz the tent version you like to keep, and simply replace the curtains however your mood ;-) A complete plain curtain version is included for those cases where you’d like to build your own sign to go above the entrance – have fun being creative!!

TEXTURES:
———–

The textures for this set are custom created for (*chanimations and deviousMind (except the spiderwebs and those textures with the pidgeon which are bought) – if you find them used by anybody else not connected to us, please inform us! Thank you in advance!

BAD SCULPTIE RENDERING or MISSING PRIMS?
————————————————-

If you have problems with sculpties seeming rough edged and not properly rezzing – go to Advanced Menu (if it doesn’t show on the top bar, press CTRL-ALT-SHIFT-D to show it), Debug Setting… – type ‘RenderVolumeLODFactor’ (without quotes) and set it to 4.000. It will take a short moment and your sculpties will render smoother when looking at them from a distance! Search the Wiki if you want more info about the RenderVolumeLODFactor.

If you notice prims missing when moveing your camera closer to an object, check your Debug Settings for the rendermaxNodeSize – standard of the newer clients is 4096, which can be far too little with very detailed objects and lead to prims disappearing. A value of 6000 can safely be used even with an older computer and will solve this problem.

————————————
Would you like to stop by in world?

You’ll find us at deviousMind/120/160/30 – the circustent is the same as our current VintageCircus mainstore building with slightly differing entrance ornaments :-) and big fat ugly spiders – don’t forget to feed them! ;-)

(*VintageCircus “Elise the Elephant”

“Ladies and Gentlemen, boy and girls, children of all ages……”

EliseElephant_set_1024


======
-Elise the Elephant-
Vintage Circus Set
======

-Elise the Elephant- contains photography props and poses with the following properties:

7 POSES (no mod/no transfer):
——————————–

• (* circus_presentation,
• (* elephant_lying,
• (* elephant_crawl,
• (* elephant_riding,
• (* elephant_artistry,
• (* elephant_artisticKneel,
• (* trapez_layingOverBack (a pose from the Trapez set – but it worked SOOOO perfectly well here too *grins*)

All POSES are static and come with ‘copy’ rights so you can put them into your posestands or make own poseball arrangements as well.

POSES-SPECIAL:
——————

No more poseballs – the torso of Elise the Elephant is replacing them, just right-click and ‘sit’. On first sit a menu pops up allowing you to pick which pose you’d like. After that, you only click the main torso of the elephant again, and you’ll receive the menu again to change between the poses.

More than that, an easy and intuitively to use adjustment-menu allows you to move the positioning of your avartar – height, rotation, everything! When you sit on Elise, speak /1a in open channel for the adjustment menu. ‘Postion’ will allow you to move your avartar more forward, backwards, left or right (X and Y axis) and of course up and down (Z axis), if needed ‘Rotation’ menu gives you more options.

And that’s all YOU have to remember, from there on the script does the work and remembers the avartar custom settings of the 50 most frequent users who adjusted their positions as long as the elephant stays rezzed. Unfortunately it cannot keep the positions when picked up back to inventory and will rez back on default settings – but since the adjustment is easy and quick, this shouldn’t be a problem *grins*.

PROPS:
——–

• (*VintageCircus – Elise the Elephant (106prim) (no mod/no transfer),
• (*VintageCircus – Elise the Elephant (61prim) (no mod/no transfer)

Elise in low and high-prim version. The feathers of the elephant can be hidden if needed – chatcommands are
/1 hide feathers
/1 show feathers

And as with everything scripted: Make sure you are in a sim that allows for scripts to run!

Have fun, and treat her well!

————————————
Would you like to stop by in world?

You’ll find us at deviousMind/120/160/30 if you are interested in single poses only or to preview the poses on your avartar!

(*photoStages: Circus Photostage

Tired of ‘the perfect location’ and finding out there are no rezzing rights? Tired of studio-backgrounds and flat images that don’t leave much room for camera angles? We’re gonna change that!

Our new series of photostages will offer you quick access to whichever world you’re looking for… It doesn’t matter anymore if you have your shootings at your home sim or simply a public sandbox – Make the sky your stage. Whenever. Whereever!

As with all our products, with much love for the detail, high quality custom textures and allowing you as much flexibility as possible!

Photostage_Circus_1024x512

“Ladies and Gentlemen, boy and girls, children of all ages……”


======
-Circus-
PhotoStage
======

‘Circus’ is the stageing addition to (*chanimations VintageCircus series and offers the perfect background blend to all the current and future sets availabe. The stage itself does not contain any poses, but the basic parts to set the atmosphere are build in, such as a tight rope and static trapezes.

The lights in the roof of the circus respond to touch and can be turned on/off by clicking them. If the lights on/off doesn’t work, as with everything scripted: Make sure you are in a sim that allows for scripts to run!

PRIMCOUNTS
————–

We try to keep our photostages as low-prim as possible – so they are stages, and not replacement for homes and sim-decorations (unless you don’t mind the fact the outside shape is not quite what you expect from a tent). Please keep this in mind.

Anyhow, here the stats:

CircusTent – Photostage is build on a basis of 40×40 squaremeters, and it sums up to approx. 50m height – the curtains in the entrance are not linked to the main tent (due to SL linking restrictions) – so make sure you have them selected as well when moving/rotating the stage (when you’re in edit-mode on the tent part, press [shift] key and select the curtains with right-click ‘edit’ to select them as well)

Alltogether, the stage sums up to 42 prims + 2 prims the curtain

————————————
Would you like to stop by in world?

You’ll find us at deviousMind/120/160/30 if you are interested in single poses only or to preview the poses on your avartar!

(*VintageCircus “The TightRopes”

“Ladies and Gentlemen – The Show begins….. “


======

-The TightRopes-

Vintage Circus Set

======

-The TightRopes- is another performance set of the (*chanimations Vintage Circus series. It contains photography props and poses with the following properties:

4 POSES (no mod/no transfer):
——————————–

• (* tightRopes,
• (* tightRopes_Joy,
• (* tightRopes_BalanceForward,
• (* tightRopes_laying

All POSES are static and come with ‘copy’ rights so you can put them into your posestands or make own poseball arrangements.

The pack includes the poses as single animations and in a multiPoseball which responds to /1 show and /1 hide and allows to toggle the poses by using the pageUp/pageDown keys.

PROPS:
——–

• (*chanimations – Tight Ropes (no mod/no transfer),
• (*chanimations – Lace Parasol (no mod/ no copy)

This time not much to say…. The Parasol comes with transfer settings so you can pass it as well to your model. Or if you’re unsure they’ll give it back, rezz it instead and position it.

The TightRopes and poseballs come in an unlinked group when rezzed – so show as one combined object in your inventory. This is to make it easier for you when adjusting positions of your artist on the ropes. Make sure you have all two components selected in edit mode when you need to move/rotate them in a group – this will save you time of re-adjusting! You do this by keeping [Shift] key pressed while you select the three items in edit menu.

If the poseball doesn’t toggle as it should – make sure you’re in a sim that allows for scripts to run!

For a successful Show!


————————————
Would you like to stop by in world?

You’ll find us at deviousMind/120/160/30 if you are interested in single poses only or to preview the poses on your avartar!


(*VintageCircus “The Trapez”

“Ladies and Gentlemen – The Show begins….. “


======
-The Trapez-
Vintage Circus Set
======

-The Trapez- is contains photography props and poses with the following properties:

4 POSES (no mod/no transfer):
——————————–

• (* trapez,
• (* trapez_hanging/(* trapez_hanging [bit lower],
• (* trapez_layingOverBack,
• (* trapez_layingStomach

All POSES are static and come with ‘copy’ rights so you can put them into your posestands or make own poseball arrangements.

The pack includes the poses as single animations and a multiPoseball which responds to /1 show and /1 hide and allows to toggle the poses by using the pageUp/pageDown keys.

The hanging pose is doubled to offer a good ‘non floating’ option for different avartar sizes, but is otherwise the same.

PROPS:
——–

• (* Trapez (5m rope) (no mod/no copy/no transfer),
• (* Trapez (10m rope) (no mod/no copy/no transfer),
• (* Trapez (static) (no mod/no transfer)

This time it’s a bit difficult with the rights. So here a short explaination: The Trapez is included in 3 versions – two animated, that will swing on click, with different rope length; and one that’s static since it might be far easier to do pictures for you that way instead of trying to catch the swinging model with your camera. *chuckles*

Anyhow… the swing-script in the trapez is ‘no copy’ – while all my poses as usual are ‘no transfer’. So that’s why you have a ‘no copy/no transfer’ item in the end. So make sure you pick up your trapez again when you use it in a sim for pictures!

And as with everything scripted: Make sure you are in a sim that allows for scripts to run!

For a successful Show!

————————————
Would you like to stop by in world?
You’ll find us at deviousMind/120/160/30 if you are interested in single poses only or to preview the poses on your avartar!

November 2014
M T W T F S S
« Oct    
 12
3456789
10111213141516
17181920212223
24252627282930
Archives
This is what others created...

Snapshot_230a

Witches' Winter Gathering

Winter Vest and Belted Leggings 1_001

Snapshot_219a

...with our creations.