(*FetishCabaret SET 24 – “WildThing”

As a little help to find set specifics easier in case you know most of our standard information already,
have a look at those sections marked with * in the headline!

—————————————————————————————–

“A matter of perception…”

FC_WildThing_Ad


======
-WildThing-
Fetish Cabaret SET 24
======

-WildThing- is clearly not for everybody – but it’s a erotic-filled MUST-HAVE for anybody interested in any fetish and D/s aspect of picture taking! …Or a good tease *giggles*

IMPORTANT:
Please test the cages beforehand, to ensure it will work in a desired way with your shape. This set is a very complex arrangement of avatar and prop that requires precision, and likely a little patience when adjusting the avatar with the bars – use the included multiPoseball instead of the pose-engine in the prop if you feel this makes adjustment easier! The set is built to cage the avatar in very tightly, and cages are provided in 3 sizes to assist fitting avatars from small to very tall. But a few different aspects will determine perfect fitting, like length of torso, legs and arms – so even if you are a small avatar, you might find the medium works better for you. If you are perfectionist with short patience, sadly this set is not for you.

-WildThing- contains photography props and poses with the following properties, please read the details after the listings for functionality of the scripts:

*6 (7) POSES
(no mod/no transfer):
————————-

• (*cage_bendDown,
• (*cageKitten,
• (*cage_legsCrossed,
• (*cage_legsCrossed (alternative),
• (*cage_legsDown_reverse,
• (*cage_legsDown,
• (*cageStand

All POSES are static and come with ‘copy’ rights so you can put them into your posestands or make own poseball arrangements with the set. Due to the nature of this poseseries, foot positions look best when wearing high heels! Alternative pose are offered, in case the first one makes your legs go too far into one another.

***Some of these poses will not be suitable as stand alone without post-processing fixes – we needed to find a compromise between keeping focus parts of the avatar mesh perfect looking and ‘butchering’ parts that are out-of-focus and distracted by the prop. This compromise might be more or less obvious depending on your avatar shape! Please preview all poses inworld through our pose-vendor to make sure it meets your needs!

PROPS (detailed info to each after listing):
———————————————-

Rezz:
(copy/no mod/no trans)
• (*chanimations – Ceiling FetishCage/L – 25 PRIMS
• (*chanimations – Ceiling FetishCage/M – 25 PRIMS
• (*chanimations – Ceiling FetishCage/S – 25 PRIMS
• (*chanimations – FetishCage/L – 13 PRIMS
• (*chanimations – FetishCage/M – 13 PRIMS
• (*chanimations – FetishCage/S – 13 PRIMS

• (*chanimations – WildThing multiPoseball – 1 PRIM (optional)

Attachments:

(transfer/no copy/no mod)
• (*FetishCabaret propCuffs w/resize wrist (left)
• (*FetishCabaret propCuffs w/resize wrist (right)
• (*FetishCabaret propCuffs w/resize ankle (left)
• (*FetishCabaret propCuffs w/resize ankle (right)

Additional parts for stageing:
——————————–

(copy/no mod/no trans)
• (*chanimations – lightChain-24links – 3 PRIMS
• (*chanimations – darkChain-24links – 3 PRIMS
• (*chanimations – lightChain-16links – 2 PRIMS
• (*chanimations – darkChain-16links – 2 PRIMS

And cause we love humor and don’t want to leave your bunny
(should you have one) feel neglected:
• (*chanimations – BunnyCage/XXXS – 13 PRIMS

=====================================
DETAILED INFORMATION
=====================================

Included in this set are both cages for the floor or hanging on chains from the ceiling (hanging cages don’t offer the ‘bendOver’ pose as it would be not logical). Each of these comes in 3 sizes from small to large and include color-change options as well as option to open/close the top gate and lock. The pose-menu marks poses that go with the open gate as ‘/name’ and those with closed gate with ‘_name’ as a little visual help to indicate the open / and closed _ state! Most will be possible to use with either state of the gate though, so we’re leaving it up to you and your creativity to decide which one you like better.

The control menu for color and gate is placed in the top metal plate (the frame that holds the opening gate) and allows you to pick between metal, steel and aluminum appearance. ‘Options’ menu allows you to set permissions who may control the control menu besides you, it allows for owner only, group, or public use. Rezzing default of permission is OWNER. – The use of the pose-engine is not effected by this selection. All scripts run in MONO.

The pose engine is placed in the root prim (the base plate), so clicking on any other part of the cage will open up selection dialog to pick your pose.

Additional chain prims are included in case you like to hand it on longer chains from the ceiling – this is a do-it-yourself process :-D

*CAGE GATE:
————

The gate opens with stored prim animation frames – as a result of this please take note that you cannot [shift]-copy the cage, as this process will delete the stored frames and you will not be able to open the top gate anymore – if you need multiple copies of the prop, ALWAYS rezz from inventory to ensure it works! Same applies for resetting. If required, rezz a fresh copy from inventory and delete the old one.

ADJUSTMENT OF POSES with /1a:
————————————

On first sit please note the messages in open chat – once sitting, either use included gesture with hot-key [F10] (the gesture is mod, so you can change the key) or speak /1a in open channel for the adjustment menu to open (both will only work if sitting on the prop).

‘Postion’ will allow you to move your avartar more forward, backwards, left or right (X and Y axis) and of course up and down (Z axis), if needed ‘Rotation’ menu gives you more options for your adjustment.

The script remembers the avartar custom settings of its 100 most frequent users who adjusted their positions as long as the cage stays rezzed.

*HOT-KEY?
———–

You’ve never worked with gestures? It’s easy, go into inventory and right click it, then select ‘activate’ in the context menu. Once activated, just press F10 key and the adjustment menu will open up if you sit on any of our (*chanimations props using this feature! Typing /adjustPose in chat will have the same effect, SL chat bar will auto-complete the command after the first few characters typed if it recognizes it being an active gesture. The gesture is mod, so you can change hot-key or command to whatever is easier for you, just double-click on the gesture in inventoy to open it.

PHOTOGRAPHER?
——————

To make it easier on photographers who work with models (or if you don’t want to adjust poses through a menu), a multiPoseballs is included. This way you can freely move your model yourself instead of ‘instructing them’ where to place their avartar. The multiPoseball responds to /1 show and /1 hide and allows to toggle the poses by using the pageUp/pageDown keys.

And as with everything scripted: Make sure you are in a sim that allows for scripts to run!

*ATTACHMENTS:
—————-

The cuffs are non-scripted and pure picture props with a resize option to adjust fitting. Please take note, they are build on minimum size already and cannot be made smaller; read included notecard on information of the resize script used. The attachments are not required with the prop – it’s a purely decorative element that doesn’t correspond to the cage in terms of ‘connection points’ or the like. They allow transfer, so can pass them to your model – or if you’re unsure they’ll give them back, rezz instead and position them.

TEXTURES:
———–

All textures for this set are custom made by Chandra Meehan for (*chanimations and deviousMind – if you find them used by anybody else not connected to us, please help protect original content and immediately inform us! Thank you in advance!

UPDATES:
———-

The cages includes an update script, which will check for free upgrades when it is rezzed – to not loose the information of your adjusted poses through rezzing, you can call for the update manually by typing “/12update” (without quotes) in open chat. (You rezz only one of the cages to receive the update, no need to do it with all included versions). As well, you don’t need to check daily yourself, we keep you informed through our mainstore and our blog should a product have received an update:

http://chanimations.deviousmind.net/about/updated/

BAD SCULPTIE RENDERING?
—————————-

If you have problems with sculpties seeming rough edged and not properly rezzing – go to Advanced Menu (if it doesn’t show on the top bar, press CTRL-ALT-SHIFT-D to show it), Debug Setting… – type ‘RenderVolumeLODFactor’ (without quotes) and set it to 4.000. It will take a short moment and your sculpties will render smoother when looking at them from a distance! Search the Wiki if you want more info about the RenderVolumeLODFactor.

That’s all you need to know, have fun and keep in mind:
“Even if it’s a bit tight, it’s good!”

————————————

Would you like to stop by in world?

You’ll find us at deviousMind/120/160/30 if you are interested in single poses only or to preview the poses on your avartar!

Comments are closed.

March 2010
M T W T F S S
« Feb   Apr »
1234567
891011121314
15161718192021
22232425262728
293031  
Archives
This is what others created...

Meeee.....owwww.

Mother of Dragons

"Pussycat"

!dM "Pussycat" LatexKitty **GACHA KEY**

Paradiso

...with our creations.