(*fruitFetish #16 “SweetValentine!”

If you didn’t prepare a sweet surprise for your Valentine yet, then it’s just right in time for a little goodie from our (*chanimations fruitFetish! series to inspire your creativity for a Valentine’s Day present that’s not going to be forgotten too soon *smirks* So here it comes! — And I’ll promise you some shiney-nice-glamour picture of this set one of these days when the second Valentines release I am still working on (which will fall into the BurlesqueCouture section of deviousBeauty) is ready! And after all, I have my own Valentine to make a picture for too *shoooos Lucca-should-he-read-this-here away from the post cause it spoils the surprise* :-D

“Sticky and seductively sweet…”


fruitFetish! seasonal PinUp SET #16
by (*chanimations

Clearly one of the sweetest, Set No.16 is our 3rd seasonal (*chanimations fruitFetish! release to add on to our pin up calender series.

Since there’s no real Valentine fruit or veggie, we’ve interpreted it this time as a ‘processed’ cocoa bean – so “SweetValentine” is, in the spirit of the season, filled with chocolate-y goodness and pralines instead. And lots of humor, love and sex-appeal to make your Valentine yours. *winks*

The set contains photography props and poses with the following properties:

10 (7) POSES (no mod/no transfer):

• (*valentine_praline,
• (*valentine_offer,
• (*valentine_present,
• (*valentine_sweety,
• (*valentine_BonBon,
• (*valentine_Topping,
• (*valentine_Topping (legDown),

• (*valentine_present (optional),
• (*valentine_sweety (optional),
• (*valentine_BonBon (optional),

All POSES are static and come with ‘copy’ rights so you can put them into your posestands or make own poseball arrangements. Due to the nature of this pose series, foot positions look best when wearing high heels!

‘optional’ poses are second versions in case the avatar’s arms vanish in the legs or float too high above them in air. If neither of them both works for you in a desired fashion, try adjusting your shape slightly for this picture! Arm length is one way to fix it, but you can also try less obvious things like slight prolonging/shortening of the torso or broadening/narrowing of the shoulders.

PROPS (details for use after listing):

PoseProps (rezz)
(copy, no mod/no transfer)
• (*chanimations fruitFetish: ValentineHeart! – 26 PRIMS,
• (*chanimations fruitFetish: ValentineHeart! (w/ground) – 27 PRIMS,
• (*chanimations fruitFetish: ValentineHeart! (w/ lots of love) – 46 PRIMS,
• (*chanimations fruitFetish: Pralines on the ground… – 34 PRIMS,
• (*chanimations fruitFetish: sweetValentine! multiPoseball (optional) – 1 PRIM

(transfer/no copy/no mod)

• (*chanimations – PralineBox (right hand),
• (*chanimations HairFlower (Roses&Pralines) (chin),
• (*chanimations redRibbon frontBow “Present” (chest),
• (*chanimations redRibbon frontBow “Praline” (chest),
• (*chanimations redRibbon frontBow “Valentine” (chest),
• (*chanimations redRibbon frontBow “Slut” (chest)

(transfer/no copy/no mod)

• (*chanimations – sweetValentine presentRibbons (upper),
• (*chanimations – sweetValentine presentRibbons (lower),
• (*chanimations – sweetValentine chocolateMess (complete)
• (*chanimations – sweetValentine chocolateMess (upper),
• (*chanimations – sweetValentine chocolateMess (lower),

Seasonal Decoration: (rezz)
(copy/no mod/no trans)

• (*chanimations sweetValentine heartRain decor – 6 PRIMS


(*chanimations ValentineHeart! is a heart-shaped pralines box, with yourself as the sweetest treat wrapped in red ribons and smeared with some more chocolate. So basically, you need to add only some sexy high-heels and you’re all dressed for making one valentine very happy! (And before the questions hit my IM box, those worn in the ad are the new ‘Elizabeth’ model by Stilletto Moody)

The heart comes in three versions, one with added prim hearts falling from the sky and scattered all over the ground, one ‘normal’ heart box with snowy ground cover, and finally one without ground if you would like to rezz them at a place where groundcover underneath is not possible. If you’d like to use the versions with ground, please take note to sink it slightly into the floor so you see the soft slopes effect as shown on the poster (otherwise it will just appear like a flat white square).

There’s some added heartRain prims as well included in case you’d like to decorate your scene, and a mini-prop “Pralines on the ground…” including the ground-lying poses.


Be prepared for a surprise when you go through the poses in the ValentineHeart, as the prims are animated to go along with your pose selection. Extreme lag can influence the performance of the prim animation, so if this is an issue for you at some point, simply select the pose again through the menu and the animation will work at this point.

Please take note, you cannot [shift]-copy the cake, if you do, the copy will not include animated prims – if you need multiple copies of the prop, ALWAYS rezz from inventory to ensure it works! Same applies for resetting. If the script seems to stack up and not run smoothly anymore, rezz a new copy from inventory and delete the old one.


No need to worry about pink and blue poseballs – you sit direct on on the heart box! On first sit please note the chatmessage you are given – as well, a menu pops up allowing you to pick which pose you’d like. After that, you only click the ground again, and you’ll receive the menu to change between the poses. For convenience, some of the poses are double in the prop but turned already to allow different perspectives for a bit more flexibility when taking pictures.


To meet all different avartar sizes, an easy and intuitively to use adjustment-menu allows you to move the positioning of your avartar – height, rotation, everything! When you sit, speak “/1a” in open channel (without quotes) for the adjustment menu (it will only work for the avatar sitting on it). ‘Postion’ will allow you to move your avartar more forward, backwards, left or right (X and Y axis) and of course up and down (Z axis), if needed ‘Rotation’ menu gives you more options.

The script remembers the avartar custom settings of up to 100 most frequent users who adjusted their positions as long as the fruit stays rezzed and the scripts are not reset. Unfortunately it cannot keep the positions when picked up back to inventory and will rez back on default settings – but since the adjustment is easy and quick, this shouldn’t be a problem *grins*.


To make it easier on photographers who work with models (or if you want to use the poses only without anything on the ground of course), an optional multiPoseball is included. This way you can freely move your model yourself instead of ‘instructing them’ where to place their avartar. The multiPoseball responds to /1 show and /1 hide and allows the model to toggle the poses by using the pageUp/pageDown keys.


The attachments come with (transfer/no copy) settings so you can pass them to your model – or rezz the items and position them instead if you’re unsure that they will give them back! Same applies to the included clothing layers. The chest bow comes in 4 different versions so you can pick a ‘tag’ to your liking :-D


The clothing layers and most textures of this set (large ValentineHeart box and its pralines, hearts on the ground) are custom maded by Chandra Meehan for (*chanimations and deviousMind – if you find any of these used by anybody else not connected to us, please inform us! Thank you in advance!


The ValentineHeart includes an update script, which will check for free upgrades when it is rezzed – to not loose the information of your adjusted poses through rezzing, you can call for the update manually by typing “/12update” (without quotes) in open chat. As well, you don’t need to check daily yourself, we keep you informed through our mainstore and our blog should a product have received an update:


If you have problems with sculpties seeming rough edged and not properly rezzing – go to Advanced Menu (if it doesn’t show on the top bar, press CTRL-ALT-SHIFT-D to show it), Debug Setting… – type ‘RenderVolumeLODFactor’ (without quotes) and set it to 4.000. It will take a short moment and your sculpties will render smoother when looking at them from a distance! Search the Wiki if you want more info about the RenderVolumeLODFactor.

If you notice prims missing when moveing your camera closer to an object, check your Debug Settings for the rendermaxNodeSize – on some clients the standard has been set to 4096, which can be far too little with very detailed objects and lead to prims disappearing. A value of 6000 can safely be used even with an older computer and will solve this problem – starting with viewer 1.24.5 the problem has been fixed.

Would you like to stop by in world?

You’ll find us at deviousMind/120/160/30 if you are interested in our single poses only or to preview the poses on your avartar! “SweetValentine” is as well as most of our other creations listed on xStreet SL!

Comments are closed.

February 2010
« Jan   Mar »