Archive for October, 2009

(*fruitFetish! #13 – The Slutty Pumpkin!

“How I met your mother?”

FruitFetish_SluttyPumpkin_resize


======
“The Slutty Pumpkin!”
fruitFetish! seasonal PinUp SET #13
by (*chanimations
======

Set No.13 is our first seasonal release to add on to our pin up calender series. If you haven’t seen any of the previous releases yet, here a short intro to what it’s all about: (*chanimations fruitFetish! is a fresh and humorous vintage pin up series consisting out of 12 fruit and vegetable sets, and one CalenderPack which will allow you to create your own fruitFetish vintage PinUp calender… or a poster for your fridge… or postcard girls… or whatever. ;-)

Please take note: Seasonal packs are add-ons and NOT included in the fruitFetish calenderPack!

“The Slutty Pumpkin!” earned its title in reference to a Halloween episode of the TV show ‘How I met your mother’, those who’ve seen it are likely going to recognize the title – it seemed kinda fitting. *smirks*

And a very special thanks goes to Nathalia Parisi, who created the sculptmap of our big pumpkin especially for this set – cause we wanted it CURVY!

The set contains aside from many many fall seasonal pumpkins photography props and poses with the following properties:

5 POSES (no mod/no transfer):
———————————-

• (*pumpkinPie,
• (*harvestTime,
• (*pumpkinThoughts,
• (*pumpkinTease,
• (*splendidHarvest

All POSES are static and come with ‘copy’ rights so you can put them into
your posestands or make own poseball arrangements. Due to the nature of
this poseseries, foot positions look best when wearing high heels!

PROPS (details for use after listing):
—————————————-

PoseProps (rezz) – all (copy, no mod/no transfer):
• (*chanimations fruitFetish: pumpkinPatch! – 40 PRIMS,
• (*chanimations fruitFetish: pumpkinPatch! (with Ground) – 41 PRIMS,
• (*chanimations fruitFetish: pumpkinPatch! (Halloween!) – 88 PRIMS,
• (*chanimations fruitFetish: “The Slutty Pumpkin!” multiPoseball (optional)

Attachments:
• (*chanimations HairFlower (pumpkinVines) (chin) (transfer, no copy/no mod)

Seasonal Decoration (rezz) – all (copy/no mod/no trans):
• (*chanimations decoPumpkin (darkOrange)
• (*chanimations decoPumpkin (bigYellow)
• (*chanimations decoPumpkins (3small)
• (*chanimations decoCrate Pumpkin

=====================================
DETAILED INFORMATION (please read!)
=====================================

(*chanimations pumpkinPatch! comes in three versions, a Halloween version with spiderwebs, spiders and skulls, one ‘normal’ pumpkinPatch with ground cover, and finally one without ground if you would like to rezz them at a place where grass just doesn’t make sense. If you’d like to use the versions with ground, please take note to sink it slightly into the floor so you see the soft slopes effect as shown on the poster (otherwise it will just appear like a flat brown square).

NO POSEBALLS NEEDED
————————–

No need to worry about pink and blue poseballs – you sit direct on on the pumpkin pile! On first sit please note the chatmessage you are given – as well, a menu pops up allowing you to pick which pose you’d like. After that, you only click the pumpkins again, and you’ll receive the menu to change between the poses. For convenience, some of the poses are double in the prop but turned 180° to allow different perspectives for a bit more flexibility when taking pictures.

ADJUSTMENT OF POSES with /1a:
————————————

To meet all different avartar sizes, an easy and intuitively to use adjustment-menu allows you to move the positioning of your avartar – height, rotation, everything! When you sit, speak “/1a” in open channel (without quotes) for the adjustment menu (it will only work for the avatar sitting on it). ‘Postion’ will allow you to move your avartar more forward, backwards, left or right (X and Y axis) and of course up and down (Z axis), if needed ‘Rotation’ menu gives you more options.

The script remembers the avartar custom settings of up to 100 most frequent users who adjusted their positions as long as the fruit stays rezzed and the scripts are not reset. Unfortunately it cannot keep the positions when picked up back to inventory and will rez back on default settings – but since the adjustment is easy and quick, this shouldn’t be a problem *grins*.

PHOTOGRAPHER:
——————

To make it easier on photographers who work with models (or if you want to use the poses only without anything on the ground of course), an optional multiPoseball is included. This way you can freely move your model yourself instead of ‘instructing them’ where to place their avartar. The multiPoseball responds to /1 show and /1 hide and allows the model to toggle the poses by using the pageUp/pageDown keys.

ATTACHMENTS:
—————-

All attachments come with (transfer/no copy) settings so you can pass them to your model – or rezz the items and position them instead if you’re unsure that they will give them back!

TEXTURES:
———–

The textures for our pumpkins are custom made for (*chanimations and deviousMind – if you find them used by anybody else not connected to us, please inform us! Thank you in advance!

BAD SCULPTIE RENDERING or MISSING PRIMS?
————————————————-

If you have problems with sculpties seeming rough edged and not properly rezzing – go to Advanced Menu (if it doesn’t show on the top bar, press CTRL-ALT-SHIFT-D to show it), Debug Setting… – type ‘RenderVolumeLODFactor’ (without quotes) and set it to 4.000. It will take a short moment and your sculpties will render smoother when looking at them from a distance! Search the Wiki if you want more info about the RenderVolumeLODFactor.

If you notice prims missing when moveing your camera closer to an object, check your Debug Settings for the rendermaxNodeSize – on some clients the standard has been set to 4096, which can be far too little with very detailed objects and lead to prims disappearing. A value of 6000 can safely be used even with an older computer and will solve this problem – starting with viewer 1.24.5 the problem has been fixed.

————————————
Would you like to stop by in world?

You’ll find us at deviousMind/120/160/30 if you are interested in single poses only or to preview the poses on your avartar!

Take a GLANCE at Burlesque Fashion…

I’m always thrilled to find any of our creations used somewhere – so this time, I’d like to hint you towards the first magazine release of GLANCE International Agency, who started a new issuu publication – and a very gorgeously done picture series of Burlesque fashion, in case any of you is in search of ‘the perfect outfit’ for the next party you’re invited to – might find it here.

I love how they integrated our (*FetishCabaret “CabaretBeauty” vanity into this gorgeous set – thanks a lot to Amalia Foxtrot and Honey Bender for deciding to use it! And wishing the magazine a good start and many interesting things to happen in the future!

(*Halloween GIFT “Pit of Doom!”

chanimations_HalloweenPit_1


========================================
Halloween 2009
“Pit of Doom”
by  (*chanimations
========================================

It’s Halloween time – so here is your gift photography set!

As with all our products, with much love for the detail, high quality textures and – whimsical creepyness! *evilsmirk*
The set contains photography props and poses with the following properties:

3 “POSES” *giggles* (no mod/no transfer):
——————————–

• (*monsterEaten1,
• (*monsterEaten2,
• (*monsterEaten3

All POSES are static and come with ‘copy’ rights so you can put them into your posestands or make own poseball arrangements – needless to say, unlike our usually photoposes, these ones are the clearly ‘unpretty’ and well… avatar-being-chewed-on like *chuckles* all fullfilling the purpose! Happy Halloween 2009!!!

PROPS (detailed info to each after listing):
———————————————-

Rezz:
• (*chanimations – “Halloween Pit of Doom” – stuffed after one… – 33 PRIMS (no mod/no transfer)
• (*chanimations – “Halloween Pit of Doom” – VERY hungry! – 33 PRIMS (no mod/no transfer)
• (*chanimations – Halloween Pit of Doom multiPoseball – 1 PRIM OPTIONAL (no mod/no transfer)

=====================================
DETAILED INFORMATION (please read!)
=====================================

NO POSEBALLS
—————–

Sit on the pit itself. On first sit a menu pops up allowing you to pick which pose you’d like. By clicking it again when sitting you will receive the menu to change between the poses.

ADJUSTMENT OF POSES:
————————–

When you sit, speak /1a in open channel for the adjustment menu (it will only work when sitting on it). ‘Postion’ will allow you to move your avatar more forward, backwards, left or right (X and Y) and of course up and down (Z), if needed ‘Rotation’ menu gives you more options.

The script remembers the avartar custom settings of up to 100 most frequent users who adjusted their positions as long as the moon stays rezzed and the scripts are not reset. Unfortunately it cannot keep the positions when picked up back to inventory and will rez back on default settings – but since the adjustment is easy and quick, this shouldn’t be a problem!

PHOTOGRAPHER?
——————

To  make it easier on photographers who work with models, or, if you rather want the moon up in the sky as ‘background’ prop and pose your witch on the ground, you can optionally use the included multiPoseball. This way you can freely move your model yourself instead of ‘instructing them’ where to place their avartar.

The multiPoseball responds to /1 show and /1 hide and allows to toggle the poses by using the pageUp/pageDown keys.

PIT OF DOOM:
—————

The prop comes in two versions for your preferred purpose – no matter which one you’ll use though, sink it into the ground until it’s no longer a square but nice and hilly as in the picture:

• ‘stuffed after one’ is your regular “one model pose prop” allowing you to select which pose you want to control which works best for an image angle – if you’d like more victims, just use the multiPoseball and copy as many of them as you like to add.

• ‘VERY hungry’ would be the prop you keep rezzed as Halloween decoration – it will allow to fit up to 8 avatars ‘on the plate’ so to speak *giggles* and fill up the empty seats with the next person sitting.

YOU LIKE?
———–

Join our update group if you’d like to stay in touch with us about new releases and future group specials, gifts and everything more!

Search for “(*chanimations” in groups if you’re only interested in our poses, or join “!dM deviousMind – UPDATE Group” (both without quotes) if you’d like to receive update infos about all our other products as well (skins, eyes, living space, and whatever else crosses our creativity *chuckles*) — the poses information goes out to both groups so no need to double-join!

Or have a look at our blog for new releases and looking back on old ones: http://chanimations.deviousmind.net

BAD SCULPTIE RENDERING or MISSING PRIMS?
————————————————-

If you have problems with sculpties seeming rough edged and not properly rezzing – go to Advanced Menu (if it doesn’t show on the top bar, press CTRL-ALT-SHIFT-D to show it), Debug Setting… – type ‘RenderVolumeLODFactor’ (without quotes) and set it to 4.000. It will take a short moment and your sculpties will render smoother when looking at them from a distance! Search the Wiki if you want more info about the RenderVolumeLODFactor.

If you notice prims missing when moveing your camera closer to an object, check your Debug Settings for the rendermaxNodeSize – standard of the newer clients is 4096, which can be far too little with very detailed objects and lead to prims disappearing. A value of 6000 can safely be used even with an older computer and will solve this problem.

Last but not least as with everything scripted: Make sure you are in a sim that allows for scripts to run!

That’s all you need to know – happy Halloween!

deviousMind goes Halloween!

…litterally!

The decision came spontaneously and surprising – so we’re excited to announce (*chanimations will put all their halloweeny-goodnesses along with those spookily-yummy cupcakes of Cupcakes & Poetry into an own little store at Halloween sim. Go and have a look, the sim is a very gorgeous custom build reminding a little of “Nightmare before Christmas” – worth to not miss!

As well, we’ll take part in Trick or Treat Hunt with a little gift you will be able to find there, and here is your SLurl to our shop: http://slurl.com/secondlife/Halloween/174/119/30! (and a picture here will follow)

Have a good-fun-wonderfully-creepy Halloween!

<3 Chandra and Elise

halloweensign_002_crop

———————————————————-
*Halloween in SL*
brought to you by the Vinyl Cafe
———————————————————-

The Halloween Sim in SL would like to invite you to participate in our Trick Or Treat Hunt, taking place October 5th – November 1st.  We are inviting all of the retailers at our four shopping areas to participate:????

  • Vinyl Cafe
  • The Dominion Fashion District
  • Halloween
  • Dominion Fetish

Here’s to a great October!

(*Bewitched, Bothered and Bewildered

“This is Halloween…”

Bewitched_Ad_512_v2


========================================
“Bewitched, Bothered and Bewildered”
by (*chanimations
========================================

It’s Halloween time coming – so here is one traditional Halloween photography set!

As with all our products, with much love for the detail, high quality custom textures and – whimsical creepyness! *evilsmirk* The set contains photography props and poses with the following properties:

8 POSES (no mod/no transfer):
——————————–

• (*broomRide,
• (*broomRide (up),
• (*witchStand (1),
• (*witchStand (2),
• (*witchStand (3),
• (*witchStand (4),
• (*witchStand (5),
• (*witchSit

Additional:
• (*chanimations Bewitched – BASIC ZHAO II (no transfer/no mod)

All POSES are static and come with ‘copy’ rights so you can put them into your posestands or make own poseball arrangements. All allow free head movement – A little detail which can make quite the difference in your images!

PROPS (detailed info to each after listing):
———————————————-

Rezz:
• (*chanimations crescentMoon – 2 PRIMS (no mod/no transfer)
• (*chanimations starMoon – 9 PRIMS (no mod/no transfer)
• (*chanimations spiderMoon (solo) – 31 PRIMS (no mod/no transfer)
• (*chanimations spiderMoon – 36 PRIMS (no mod/no transfer)
• (*chanimations spiderMoon (moreStars) – 43 PRIMS (no mod/no transfer)
• (*chanimations – Bewitched multiPoseball – 1 PRIM OPTIONAL (no mod/no transfer)

Attachments:
• (*chanimations witchBroom (no copy/no mod)
• (*chanimations spider witchHat (no copy/no mod)
• (*chanimations halloweenCat (no copy/no mod)
• (*spider (right hand) (no copy/no mod)
• (*chanimations pet spider (right hand) (no copy/no mod)
• (*chanimations pet spiders (right hand w/ hold) (no copy/no mod)

=====================================
DETAILED INFORMATION (please read!)
=====================================

The Moon prop comes in different versions to match your picture ideas and/or prims you have available.

NO POSEBALLS
—————–

Sit on the moon itself. On first sit a menu pops up allowing you to pick which pose you’d like. By clicking it again when sitting you will receive the menu to change between the poses.

ADJUSTMENT OF POSES:
————————–

When you sit, speak /1a in open channel for the adjustment menu (it will only work when sitting on it). ‘Postion’ will allow you to move your avatar more forward, backwards, left or right (X and Y) and of course up and down (Z), if needed ‘Rotation’ menu gives you more options.

The script remembers the avartar custom settings of up to 100 most frequent users who adjusted their positions as long as the moon stays rezzed and the scripts are not reset. Unfortunately it cannot keep the positions when picked up back to inventory and will rez back on default settings – but since the adjustment is easy and quick, this shouldn’t be a problem!

PHOTOGRAPHER?
——————

To make it easier on photographers who work with models, or, if you rather want the moon up in the sky as ‘background’ prop and pose your witch on the ground, you can optionally use the included multiPoseball. This way you can freely move your model yourself instead of ‘instructing them’ where to place their avartar.

The multiPoseball responds to /1 show and /1 hide and allows to toggle the poses by using the pageUp/pageDown keys.

Animation Overrider:
———————

This is something we don’t usually do, but decided to include it for the seasonal occasion:
In case you’d like to use parts of this set for your Halloween costume, included you’ll find the stands, flights and sit of this posepack put together into a basic static AO – just wear! It’s based on the open source ZHAO II and allows you to add more poses to it or make own pose notecards – grab the help notecard from ZHAO menu if you like to do that to learn how. The textures used for this AO are created by (*chanimations to match this set :-)

TEXTURES:
———–

The textures for this set are custom made for (*chanimations and deviousMind (besides the moontexture, hat-band and skulls) – if you find them used by anybody else not connected to us, please inform us! Thank you in advance!

BAD SCULPTIE RENDERING or MISSING PRIMS?
————————————————-

If you have problems with sculpties seeming rough edged and not properly rezzing – go to Advanced Menu (if it doesn’t show on the top bar, press CTRL-ALT-SHIFT-D to show it), Debug Setting… – type ‘RenderVolumeLODFactor’ (without quotes) and set it to 4.000. It will take a short moment and your sculpties will render smoother when looking at them from a distance! Search the Wiki if you want more info about the RenderVolumeLODFactor.

If you notice prims missing when moveing your camera closer to an object, check your Debug Settings for the rendermaxNodeSize – standard of the newer clients is 4096, which can be far too little with very detailed objects and lead to prims disappearing. A value of 6000 can safely be used even with an older computer and will solve this problem.

Last but not least as with everything scripted: Make sure you are in a sim that allows for scripts to run!

That’s all you need to know – happy Halloween!

————————————
Would you like to stop by in world?

You’ll find us at deviousMind/120/160/30 if you are interested in single poses only or to preview the poses on your avartar!

October 2009
M T W T F S S
« Sep   Nov »
 1234
567891011
12131415161718
19202122232425
262728293031  
Archives
This is what others created...

CircusFreakFinal

CircusFreaksGroup3

CircusFreaksGroup2

@t the lotus tree

The Monthly Mob bogger project round 1 gang

...with our creations.