“Ladies and Gentlemen – The Show beginns….. ”
Fetish Cabaret SET 15
-ShibariDouble- follows ‘TiedSuspension’ in our series of shibari photo sets – this one is inspired by a shibari drawing and goes into a more traditional direction with the bamboo appearance, and at the same time moves in a completely different direction by the use of smooth black satin ribbons instead of ‘traditional rope’. As the other shibari set, it does not try to imitate realism – so the shibari experts amongst you might find a ‘not possible in RL’ here and there, and yes, it’s for foto esthetics! And for that, there’s quite a few details in the building structure, and as always, high detailed textures. The set contains photography props and poses with the following properties:
6 (5) POSES (no mod/no transfer):
• (* shibariDouble(1) armsBehind,
• (* shibariDouble(1) armsHighClosed,
• (* shibariDouble(1) armsHighOpen,
• (* shibariDouble(2) lowerLeg,
• (* shibariDouble(2) tiedLegs,
• (* shibariDouble(2) tiedLegs (headRight)
(the last two are slightly doubled, only with different head direction.
A little detail which can make quite the difference in your images!)
All POSES are static and come with ‘copy’ rights so you can put them into your posestands or make own poseball arrangements.
The pack includes the poses as single animations and in a multiPoseball which responds to /1 show and /1 hide and allows to toggle the poses by using the pageUp/pageDown keys. (including the poseball makes it easier in some cases for photographers who work with models to adjust their positioning)
ADJUSTMENT OF POSES:
There is no more poseballs – sit on the bamboo itself. On first sit a menu pops up allowing you to pick which pose you’d like. After that, you only click the bamboo again, and you’ll receive the menu to change between the poses.
To meet all different avartar sizes, an easy and intuitively to use adjustment-menu allows you to move the positioning of your avartar – height, rotation, everything! When you hang on the bamboo, speak /1a in open channel for the adjustment menu. ‘Postion’ will allow you to move your avartar more forward, backwards, left or right (X and Y axis) and of course up and down (Z axis), if needed ‘Rotation’ menu gives you more options.
And that’s all YOU have to remember, from there the script does the work and remembers the avartar custom settings of the 50 most frequent users who adjusted their positions as long as the rack stays rezzed and the scripts are not reset. Unfortunately it cannot keep the positions when picked up back to inventory and will rez back on default settings – but since the adjustment is easy and quick, this shouldn’t be a problem *grins*.
PROPS (detailed info to each after listing):
• (*chanimations – ShibariDouble(1) (no mod/no transfer)
—> Total of 91prims: part (1) 63prims, part (2) 28prims
• (*chanimations – ShibariDouble(2) (LP) (no mod/no transfer)
—> Total of 67prims: part (1) 47prims, part (2) 20prims
• (*chanimations – Shibari(1) ‘posestand’ for attachment fitting (no mod/no transfer)
• (*chanimations – Shibari(2) ‘posestand’ for attachment fitting (no mod/no transfer)
Attachments (no mod/no copy):
• (*shibariDouble(1) – BlackSatin (lower arm left)
• (*shibariDouble(1) – BlackSatin (lower arm right)
• (*shibariDouble(1) – BlackSatin (lower leg right)
• (*shibariDouble(1) – BlackSatin (lower leg left)
• (*shibariDouble(1) – BlackSatin ‘armsHighClosed’ (hand left)
—> (the attachment is created to go with ‘(* shibariDouble(1) armsHighClosed’ pose only)
• (*shibariDouble(1) – BlackSatin ‘armsBehind’ (nose)
—> (the attachment is created to go with ‘(* shibariDouble(1) armsBehind’ pose only)
• (*shibariDouble(2) – BlackSatin (pelvis)
• (*shibariDouble(2) – BlackSatin (lower arm right)
• (*shibariDouble(2) – BlackSatin (lower arm left)
• (*shibariDouble(2) – BlackSatin (upper leg left)
• (*shibariDouble(2) – BlackSatin (lower leg left)
• (*shibariDouble(2) – BlackSatin (lower leg right)
PLEASE TAKE NOTE: Demos of the satin attachments are available in our mainstore! These attachments work with the poses only and can’t be worn as fashion accessory – as well for size adjusting, please use the included ‘posestands’ (they are basically a down-tuned rack version and will have you in in the right positions – but it is far easier to access the attachment areas than doing it in the bamboo build.
BAMBOO RACK: To allow you more flexibility in how you set up your shot, the bamboo rack comes in an unlinked group when rezzed (it show as one combined object in your inventory). This allows you to play a little with the alignment of both parts, and as well makes it easier for the model to access their respective pose menus by just clicking on any part of ‘their’ rack section. If you want to move/rotate both parts together in the alignment I made, make sure you have both selected in edit mode, this will save you time of re-adjusting! You do this by keeping [Shift] key pressed, then right-click choose ‘edit’ on the first, and (with still pressed shift key) right-click choose ‘edit’ on the second part. When both are highlighted with the blue/yellow lines, you can let go of [shift] and everything moves as a group now. – If something goes wrong – just re-rezz from inventory to go back to the original alignment.
ATTACHMENTS: The attachment BlackSatin ribbons are ‘no modify’, but their size can be adjusted by touch menu – please read included notecard for information regarding the resize script! Please keep in mind, with the amount of avatars out there there will be no 100%-fits-all solution – you might need to adjust your shape slightly during the shooting and make (random example) your arms a bit thinner if you can’t get it right otherwise.
All attachments come with ‘transfer’ setting so you can pass them to your model – or if you’re unsure they’ll give them back to you, rezz them instead and position them. (Unless you have deleted the re-size scripts in them, you might want to consider passing the explaination of the functions as well to them to avoid any accidential clicks!)
In most cases before resizing is needed, slightly moving the ropes on the legs downwards or upwards will help. As well, keep in mind the /1a command to adjust your avatar position up and downwards!
And as with everything scripted: Make sure you are in a sim that allows for scripts to run!
That’s all you need to know, so from here on…. have fun hanging around…
If you would like to surround your shibari bamboo rack with a little bit more bamboo… have a look at our gardening section! You can find a bamboo planter with colorchange options as either ‘transfer’ or ‘copy’ permissions.
Would you like to stop by in world?
You’ll find us at deviousMind/120/160/30 if you are interested in single poses only or to preview the poses on your avartar!